ELECTROSMOG, EMF
POLLUTION
& PROTECTION NOTES
SEE ALSO ;
http://soundofstars.org/scalardevices.htm
http://soundofstars.org/electrosmog.htm
ELECTROMAGNETIC WAVE
DISTURBANCE PREVENTING MATERIAL
JP2004103783
2004-04-02
Inventor(s): SATO TSUNEO; SATO AKIHARU
Classification: - international: E04B1/92; H05K9/00; E04B1/92; H05K9/00;
(IPC1-7): H05K9/00; E04B1/92
Abstract -- PROBLEM TO BE SOLVED: To provide an electromagnetic
wave disturbance preventing material which keeps an residence environment and
an office environment free from an electromagnetic wave disturbance by using
this material as an internal material in an office and a residence or external
materials for various kinds of electric products and electronic appliances. ;
SOLUTION: The material is composed of an electromagnetic wave absorbing and
extinguishing member 1 formed by coating an unwoven fabric, paper, etc. with an
electromagnetic wave absorbing and extinguishing substance formed by mixing the
fine powder of tourmaline and that of bamboo charcoal into a binding material
by adhesion, a decoration panel member 2 which is secured to one surface of the
electromagnetic wave absorbing and extinguishing member, and composed of paper,
cloth, an wood plate, a synthetic resin plate, a synthetic resin sheet, etc.;
an electromagnetic wave reflection member 3 which is secured to the other
surface of the electromagnetic wave absorbing and extinguishing member, and
composed of a metal plate such as an aluminum plate and a stainless plate.
http://www.rexresearch.com/tourmaline/tourmaline.htm
Electromagnetic shield: Rick K. Kanase
Abstract
An electromagnetic shield (20) for protecting individuals from the adverse
effects of electromagnetic radiation includes a homogenous composition of
finely ground tourmaline and a porous carrier. The electromagnetic shield (20)
is attached to a radiating device such as the handset of a portable telephone.
The tourmaline reacts with moisture in the air to produce negative ions which
cancel the positive ions created by the radiating device, thereby substantially
reducing or eliminating the harmful effects of the radiation. The
electromagnetic shield (20) composition can be molded into housings for
radiating devices.
[ S.O.S. : --> ] TRUTH ABOUT
EMF WIFI PROTECTION
Jul. 29,
2017 at 8:08 p.m.
PrintRaw
message
Doc Stars
doc_starz@yahoo.com [sound_of_stars] <sound_of_stars@yahoogroups.com>
To:
sound_of_stars@yahoogroups.com,Doc Stars <doc_starz@yahoo.com>
USER,
FRIEND ASKS ABOUT HOW TO PROTECT AGAINST WIFI RADIATION / TOWERS ;
Im in Oz
now but back at you, just before you go I forgot to ask your advice on emf/wifi
personal protectors. I used them for years but were never sure which brand was
best. I start a new joib soon and there is a huge wifi mast on the building.
good
question, a lot of the stuff out there is crap or not significantly
effective.... one issue that arises is that a lot of these gadgets if they do
anything at all will only protect against one field type usually electrical,
but the mag field emission associated with wifi etc can also be harmful and the
only good way to screen against that is with "mu metal" an expensive
option. To be truly safe if you are parked next to a big antenna, and its
becoming popular with municipalities across the planet to stick these monsters
right next to hospitals, fitness and recreation centers, schools, apartments,
shopping malls, etc.... is to have a faraday enclosure around yourself....
there are other options that can help - Im about to leave the library, and will
be gone for a few hours, remind me to get back to you on this ok?
ok great
thank you
no
worries!
https://www.naturesenergieshealth.com/health/therapeutic-energy-wear/bioenergy-pendant/
The
Natures Energies Bioenergy Pendant
Achieve
Better Health and Well-being through the cutting edge technology in the
Bioenergy Pendant.
naturesenergieshealth.com
Had this
once
7/29/17,
7:42 PM
yah, I
had one of these once so can relate ; https://www.bioelectricshield.com/
EMF
Protection | BioElectric Shield
EMF
Protection from all devices/WiFi. - Physics-based Crystal Technology- lifetime
energy protection from EMF and other people's unhealthy energies. Watch Video
Now
bioelectricshield.com
some i used
to know told me he thought there was something to this as well as the qlink ;
https://q-link.ca/product-category/qlink-pendants/
personally
Im a bit dubious on how much a small wearable piece of jewellery is helpful for
general emf protection, not saying it isnt possible just not likely nor
sufficient....\
one good
rule of thumb you can pretty much apply generally is to avoid any commercial
products that use the word 'scalar' in them
a lot of
woo being pushed by a lot of peddlers that have no idea themselves what
'scalar' actually means, they just know it sounds exotic and they count on the
average person also not understanding what it is.... that goes pretty much the
same for 'orgone' any thing consumer item wise, pretty much - there are
exceptions to both but literally less than 10% of the products out there have
merit
so, if
you want to get some defense against wifi there are a few things you can do
one sec...
the best
defense would be to have a faraday style canopy ;
http://www.electricsense.com/7448/faraday-bed-canopy-effective-emf-protection/
https://www.emfanalysis.com/bed-canopies/
http://www.lessemf.com/bedding.html
often
thats not available or possible
your next
best option is protective garments
https://www.lessemf.com/personal.html
EMF
Shielding Garments and Clothing
EMF
Shielded Clothing to Protecting the Body from Electromagnetic Fields
lessemf.com
in your
situation you will keep your health most intact however by not only screening
out what you can but also strengthening your body against the emf stress
see link
; http://soundofstars.org/mindcontrolprotection.htm
note,
above link - see list of health supplements on that page with recipes /
formulas these are described as being helpful against 'electronic mind control'
however the same ingredients are excellent for maintaining health against
harmful emf
one of
the biggest hazards from emf is the emf noise pollution it dumps into the human
bodies tissues, neurology, etc..... so one way we can offset this is by using
alternate means to re-cohere the em harmony in the body we can do that with our
SOS frequencies and you can do this with earthing, grounding as well - these
used together are a powerful combo and they can help offset much of the
stresses caused
articles
on earthing / grounding ;
http://www.dailymail.co.uk/tvshowbiz/article-3975102/Pete-Evans-uses-earthing-mats-fight-dangers-Wi-Fi.html
https://wellnessmama.com/128198/wifi-safe/
http://www.barefoothealing.com.au/n/dangers-of-wireless-cell-phone-radiation-to-pregna/194
Also I
will be releasing more info on a new frequency based treatment that i have been
experimenting with that looks promising - altho our frqs can already be used
for this
7/31/17,
4:24 PM
Yes its
so hard to know for sure if these things work, I mean I believe we can counteract
the effects I just dont know if the science stands up. I am in an apartment
block and I have wifi everywhere and now in the job we have a hug mast. I need
to do something fast. The wearables are not a bad idea and the nutrition info
is great but I need a permanent solution. The pendant you showed me is dam
expensive!!
Any idea
about the science behind this?
https://www.naturesenergieshealth.com/health/orgone-energy/orgone-geoclense/
Orgone
Geoclense
The most
powerful geopathic stress harmonization device ever built. For average sized
homes large homes and buildings.
naturesenergieshealth.com
I know I
know it says orgone but have a read of it and let me know what you think?
mostly if
not all "woo", on the link they say ; "The goeclense uses a
programmed radionic system to..." and they mention "scalar"
tech, generally avoid radionics, there is limited merit in that arena but most
of it is absolute crap and a waste of time and money, same thing applies to
scalar tech.... for what you are after and for what they are charging, the
probability is you wont get any where near the effects desired for what you
spend with them. 'Orgone' is a valid subject but most people shuffling supposed
'orgone' related products out there are completely ignorant of what it actually
is, how it works, etc.... so most of it is pure junk and hucksterism, when you
need to vet a supposed orgone based product, its best to go right to source, ie
the real pros and authorities on the subject like James Demeo ;
http://www.orgonelab.org/
James
DeMeo's Research Website - On Wilhelm Reich & Orgone Energy
home
pageThe OBRL Blog: https://obrlnews.wordpress.com The OBRL Yahoo Email Notices:
https://groups.yahoo.com/neo/groups/OBRL-News-Bulletin/info James DeMeo's
Facebook: https://www.facebook.com/jamesdemeophd
orgonelab.org
SEE :
Growing Nonsense About Wilhelm Reich and Orgone Energy on Global Internet.*
The
current craze about "orgonite", "orgonium", "orgone
generators", "orgone zappers", "chembusters" and
similar distortions** has done a tremendous damage to the research legacy of
the late Dr. Wilhelm Reich, who discovered a new cosmic force in nature and
called it the orgone energy. The abuse of fact in this crazed and very public
distorion of Reich is comparable to someone who would abuse nutritional or
herbal remedies, by claiming if you mixed those substances up with purple and
pink glitter, and stuck a yin-yang or hex-symbol or mandala on your forehead
when ingesting them, they would then "align the cosmic forces to bring you
money, wealth, happiness, sex, power, love!", etc. Nutritional supplements
and herbal remedies, when carefully used according to the scientific and
empirical evidence worked out by generations of physicians and healers, can
work a very powerful influence on human physiology, to cure many diseases or
keep you well and strong. Reich's original orgone accumulator, in this
comparative example, is an equally if not more powerful therapeutic agent for
improving the immune system, and reducing symptoms of a variety of diseases,
including cancer. It is, all by itself, a very serious scientific and medical
breakthrough discovery and powerful therapeutic tool, and there's nothing
mystical about it.
SEE REST
OF ARTICLE HERE ;
http://www.orgonelab.org/orgonenonsense.htm
oh my
thats not good
YUP
you would
be far better off, to start out with - get the mesh screen canopy immediately
for your bed, this way when you sleep at the very least, half the time of your
day to day approx you will have real tangible protection, ie you wont be
exposed to it, and add in a grounding sheet for your bed with a grounding cable
connected to socket - if the current in your building isnt to dirty, use aq
grounding mat at work and just get an actual negative ionizer, a real one, not
one with woo woo radionics and orgonite, but just one you get from the local
drug store or hardware store, you can get a reasonable one for 70 bucks US on
average, this will help offset the damage from exposure a LOT, and Iwill get
back to you on more methods as soon as I can, for now tho, generally avoid the
'pendants' and other such things at least for serious EMF protection cos on
average they cant and wont deliver what you want and need, not saying there
cant be some benefits associated with wearables, just that in your particular
situation as you described it, its highly unlikely, seriously
8/1/17,
4:33 PM
I hear
ya. What about things like this that clean the air and produce negitive ions
http://negativeionizers.net/best-negative-ion-generators-home-air-ionizer-reviews/
The Best
Negative Ion Generators | Home Air Ionizer Reviews 2017 | Negative Ionizers
If you're
looking for the best negative ion generator without ozone, this page has a
detailed review of high-density negative ionizers for sale and why the
negativeionizers.net
should be
ok, ideally you want one that has a strong motor / fan as well so they get
dispersed better
Oh good
so this kind of meathod works?
yes
absolutely altho its only part of the solution i suggest products from this
company or similiar ; http://www.bionairecanada.com/
Bionaire®
Canada - Pure Indoor Living | Air Purifier Filters Humidifier Filters Air
Purifiers Humidifiers Heaters Fans
Pure
quality. Innovative design. Advanced Technology. Experience Pure Indoor Living
with the Bionaire® Brand. Offering an ideal balance of form and function,
Bionaire® products help nurture and renew your well-being to transform your
personal environment with purity and comfort. Indoor air quality a...
bionairecanada.com
And this
is shite even though its got the right minerals?
for
proper emf protection you still want a screen like the bed canopy mentioned
http://www.modernwearables.com/product/qp2-quantum-pendant-5000-negative-ions-with-string
Quantum
Pendant with Scalar Energy Japanese Technology 5000 Negative Ions
High
quality hand-crafted Quantum pendant with Scalar Energy made from 75 natural
deep earth minerals and Japanese volcanic lava. All our pendants are
manufactured at our ISO Certified factory in Asia under extreme heat and
special process before it is coagulated to form bio-ceramics under low tempe...
modernwearables.com
Yes the
canopy will be a longer term plan
Its a
great idea
i dont
want to say outright that its shiite per se but it isnt going to deliver an
appropriate cost / benefits ratio for what you are after
its more
of a fun novelty item than anything else
Did you
watch the video on the site with the reading?
there
were a number of sites, cant recall which one you mean exactly.... when dealing
with emf, keep in mind that you have to protect against electrical fields,
microwave emissions, dirty magnetic fields.... the first two are easier to
manage but its harder to protect against mag fields.... to do that you either
have to block or cohere the fields... preferably both but especially the former
faraday
style protection generally is the best way to go and is most comprehensive as
it can filter out a lot of all types of fields but it can also be more
cumbersome and expensive
Yeah
thats the problem. The vid is just on my last message about thd pendant. It
does say scaler which you said was a no no but it also shows the negitive ion
count which you said was a yes
yeah, I
didnt watch that vid, honestly my feedback is, esp if money is tight, you want
to make sure you spend it on something sound... even simply buying a shirt with
a screen built into as an undergarment is better,,, you can get it from the
same place that sells the canopy.... most pendants from what ive seen just
arent worth the cash... some can have a modest effect on biology but
understand, esp in your situation you are being bathed in an ocean of toxicity,
a pendant isnt going to offset the overall collateral damage taking place
8/7/17,
2:15 PM
https://www.youtube.com/watch?v=Nv6l348CHU4
11/18/17,
11:29 AM
Hi
Michael, is it ok with you if I share our above conversation with members via
this link ; http://soundofstars.org/electrosmog.htm
11/18/17,
3:01 PM
Right
person Don?
sorry
meant to say 'Brian'
My man you
have been so good to me I am happy to help.
thx
amigo! i get asked similiar questions with regularity so wanted to put
something up to give to people when they ask, our convo covers much of the key
points but wanted to get your permission first!
Welcome.
I went with shelidite from Iyashi
Good
products so far
Nice
ground cable i connected to the steel table too
very
cool! thx for the update! 🙂
12/22/18,
5:05 PM
==================
Re: [
S.O.S. : --> ] TRUTH ABOUT EMF WIFI PROTECTION
Jul. 31,
2017 at 12:56 p.m.
PrintRaw
message
ladyhawk
hawk tarabead@gmail.com [sound_of_stars] <sound_of_stars@yahoogroups.com>
To:
sound_of_stars@yahoogroups.com
Greetings
Alessandra!
Great to
know you are someplace well connected to this.
Keep
posting please.
I for one
am always most interested in European news.
Love it.
Thanks
Tara
On
30/07/2017, alessandra previdi previdi.alessandra@gmail.com
[sound_of_stars]
<sound_of_stars@yahoogroups.com> wrote:
>
Hello, probably you can find serious answers here: www.biogeometry.ca
> They
recommend not just a pendant but many other things. Read "the
>
miracle of Hemberg" on the website, how Ibrahim Karim succeeded in
>
clearing a whole village from EMF
>
greetings from italy!
>
alessandra
>
www.radionica.it
>
>
> Il 30/07/2017
04:08, Doc Stars doc_starz@yahoo.com [sound_of_stars] ha
>
scritto:
>>
>>
USER, FRIEND ASKS ABOUT HOW TO PROTECT AGAINST WIFI RADIATION / TOWERS ;
>>
>>
just before you go I forgot to ask your advice on emf/wifi personal
>>
protectors. I used them for years but were never sure which brand was
>>
best. I start a new joib soon and there is a huge wifi mast on the
>>
building.
>>
>>
good question, a lot of the stuff out there is crap or not
>>
significantly effective.... one issue that arises is that a lot of
>>
these gadgets if they do anything at all will only protect against one
>>
field type usually electrical, but the mag field emission associated
>>
with wifi etc can also be harmful and the only good way to screen
>>
against that is with "mu metal" an expensive option. To be truly safe
>>
if you are parked next to a big antenna, and its becoming popular with
>>
municipalities across the planet to stick these monsters right next to
>>
hospitals, fitness and recreation centers, schools, apartments,
>>
shopping malls, etc.... is to have a faraday enclosure around
>>
yourself.... there are other options that can help - Im about to leave
>>
the library, and will be gone for a few hours, remind me to get back
>>
to you on this ok?
>>
>>
ok great thank you
>>
no worries!
>>
>>
https://www.naturesenergieshealth.com/health/therapeutic-energy-wear/bioenergy-pendant/
>>
The Natures Energies Bioenergy Pendant
>>
Achieve Better Health and Well-being through the cutting edge
>>
technology in the Bioenergy Pendant.
>>
naturesenergieshealth.com
>>
Had this once
>>
6:42PM
>>
yah, I had one of these once so can relate ;
>>
https://www.bioelectricshield.com/
>>
EMF Protection | BioElectric Shield
>>
EMF Protection from all devices/WiFi. - Physics-based Crystal
>>
Technology- lifetime energy protection from EMF and other people's
>>
unhealthy energies. Watch Video Now
>>
bioelectricshield.com
>> some
i used to know told me he thought there was something to this as
>>
well as the qlink ; https://q-link.ca/product-category/qlink-pendants/
>>
personally Im a bit dubious on how much a small wearable piece of
>>
jewellery is helpful for general emf protection, not saying it isnt
>>
possible just not likely nor sufficient....\
>>
>>
one good rule of thumb you can pretty much apply generally is to avoid
>>
any commercial products that use the word 'scalar' in them
>>
a lot of woo being pushed by a lot of peddlers that have no idea
>>
themselves what 'scalar' actually means, they just know it sounds
>>
exotic and they count on the average person also not understanding
>>
what it is....
>>
>>
one good rule of thumb you can pretty much apply generally is to avoid
>>
any commercial products that use the word 'scalar' in them
>>
a lot of woo being pushed by a lot of peddlers that have no idea
>>
themselves what 'scalar' actually means, they just know it sounds
>>
exotic and they count on the average person also not understanding
>>
what it is....
>>
>>
USING
FREQUENCIES WITH BLUE TOOTH / WIFI DEVICES
USE THESE
KINDS OF DEVICES CAUTIOUSLY ; you can benefit from their use but if your health
is debilitated you want to avoid being exposed to things like smart meters,
wifi, even blue tooth too much (electro-smog, electro-pollution), see the play
list link given below for more info
You can
benefit from playing the tracks audibly with your bluetooth / wifi device more,
if you can feel experience the vibes of the tracks but at the same time dont
expose your body to much to the wifi/bluetooth signal proximity so keep out of
the physical range of near field exposure of the wifi transmitter as much as
possible and stay within kinetic range of frequency tracks
DANGEROUS
FREQUENCIES : EFFECT ON LIFE, ElectroSmog, Smart Meters Danger, Wifi, EMF
Protection
https://www.youtube.com/playlist?list=PL9-HzPUvd0lSe5jXfsof1wQQFoUcYvJC3
ARTHRITIS
SEE WEBLINK ON LINE FOR MORE INFORMATION AT ;
http://www.soundofstars.org/arthritisfrequencies.htm
Collection
of 39 files
EMF
PROTECTION
Apr. 8,
2018 at 12:53 a.m.
PrintRaw
message
Doc Stars
<doc_starz@yahoo.com>
To:
doc_starz@yahoo.com
Thank you
for your interest. Its important to understand that our
frequencies
do not offer full protection against all EMF noise
pollution,
however from our tests and independent studies and
experiments
we strongly believe that they function well in
re-cohering
patterns of vitality in compromised tissues and
environments.
Our members and one German clinic have documented this in reports, photographs
and similiar which
you can
review first hand on out site. Damage to organisms
from
external EMF fields occur along a number of vectors such
as chaotic
EMF noise and thermal fluctuations. Tissue in
toxic
environments has been found to sustain vitality and even
regenerate
when supported by our frequencies. All of our
frequencies
are entirely experimental to date and are not
approved
by medical authorities such as the FDA. If you
wish to
dramatically increase your protection against harmful
EMF we
suggest that in addition to using our frequencies you
also use
fllexible mesh screen style faraday cages / enclosures
such as
those provide by the online company called '
"LESSEMF.COM"
And or
you consider using MU metal sheeting to protect against
the
magnetic field component of EMF pollution.
I cant
say I agree with the person responding to your questions, except the part about
transformers.
Generally
this is not good, the closer the lines the worse it is
You have
to worry about two parts ; the electric and magnetic field
The
magnetic field is harder to shield from altho it has less propagation distance,
only certain materials such as mu metal
can block
mag fields
There can
be some small variance in electro-pollution leaking from lines, this is related
to factors like how are the lines insulated, are they old or new lines, how far
are the lines from you
Most
power lines will be standardized to a local municipality, some places having
older infrastructure may be slightly different from newer places, but the power
/ current out put from most lines are
not
something you want to have in close proximity
You can
shield the electrical field more easily at least, if you are stuck in such a
place I would at the very least recommend that you
protect
yourself while you sleep, you can use something like
a bed
canopy style fabric based faraday cage, for solutions
like
these see ;
http://lessemf.com/
--------------------------------------------
On Sun,
5/19/19, Msenlightened1 <enlightened_divinity@yahoo.com> wrote:
Subject:
Re: 50% OFF - FREQUENCIES : SOUND OF STARS
To:
"Donald Adams" <donald.adams@soundofstars.org>
Received:
Sunday, May 19, 2019, 1:42 PM
Good Day
Donald…What
do you know about
living
under power lines? I believe they can be a good and bad
thing?Question:
Dear
Kryon, I
have just purchased a new home and found out that
there are
electric power lines at the back of the property.
It's
nearly an acre, so the lines are not directly over
my house,
but still about 50 yards away on my property.
Should I
be concerned about the electro-magnetics and their
effect on
my family?
Answer: Each
problem of this sort is unique. What
power do
they carry, and how often? Are they high or low
energy
power lines? If they can move a compass from your
back
door, then they are inappropriate for your life. The
distance,
however, is the key here. The ones you have will
be fine.
They are far enough away.
Now…
about that transformer that is
close to
the house…
FARDAY
CAGE EQUIPMENT NOTES LINKS suppliers lessemf
Apr. 30
at 1:02 p.m.
PrintRaw
message
Doc Stars
<doc_starz@yahoo.com>
To:
doc_starz@yahoo.com
https://www.pcmag.com/article/335782/how-to-make-your-own-faraday-cage
https://thesurvivalmom.com/why-and-how-to-protect-your-gear-from-emp/
https://www.thereadystore.com/diy/9713/building-your-own-faraday-cage/
https://www.nontoxicliving.tips/blog/what-you-need-to-know-about-emf-protection-products
https://www.washingtonpost.com/local/police-say-suspect-foiled-monitoring-device/2013/01/26/8511de50-681b-11e2-85f5-a8a9228e55e7_story.html?noredirect=on&utm_term=.d62239004b63
https://www.nontoxicliving.tips/detox-your-emfs-with-the-best-digital-detox
===========
http://lessemf.com/mag-shld.html
http://lessemf.com/paint.html
Application
Note: How Much Area Do I need to Cover?
The
amount of shielding that you will achieve depends on many factors, including
the size and shape of the shield. When using a flat shield on a wall, floor, or
ceiling to shield a source of field that is close to the shield (within 8
inches), plan to cover an area that extends at least to the 2 mG line.
Method:
1- Using
your gaussmeter, slide along the surface of the wall to locate the hot spot to
be shielded.
2- Now
slide the gaussmeter to the right, to the left, up, and down to identify how
far you must shield to get to the 2 mG line.
Make sure
to check for additional sources of magnetic field (lights, wiring, appliances
and so on), that may be located inside adjacent walls, floor, ceiling or within
the same room.
Click
here for a short instructional video on doing a magnetic field survery for
shield design.
http://lessemf.com/surveyanimation.html
Learn how
to shield magnetic fields. Download our free Guidelines For Installing Magnetic
Shielding
Shielding
FAQs More answers to Magnetic Shielding Questions
Sorry, no
returns on cut goods. See Return Policy
Which
magnetic shielding material should I use?
For
strong fields
(over 1
Gauss):
high
saturation, low permeability alloys
For weak
or moderate fields
(milliGauss
levels):
low
saturation, high permeability alloys
For high
frequency fields:
Giron (best
performance, large format)
MagnetShield
(good performance)
Shieldene®
Corrosion Resistant (good performance)
PaperShield
(low performance)
Speaker
Magnet Shield (small magnets) Magnetic Shielding Foil
Mag-Stop
Plates (large format)
JointShield
(adhesive on one side)
MuMetal
Wire
MuMetal
Rod
EMP
Can Finemet (kHz range)
CobalTex
(MHz range)
Still
can't decide? Consider our Magnetic Shielding Alloy Sampler
SHIELDENE®
CORROSION RESISTANT MAGNETIC SHIELD PLATE
SHIELDENE
Corrosion Resistant Magnetic Shield PlateSHIELDENE Magnet Shielding Plate
Perfect
Size for Many Projects, Indoors or Outdoors
Need to
cover a large area? Worried about rusting? This material is an excellent choice
for moderate magnetic shielding (permeability ~1000) when cost is the major
consideration. Large 24 x 48 x 0.0235 inch format, weighs less than 8 pounds
per sheet, and delivers up to 80% magnetic field reduction when size and
position are optimized. Magnetic Permeability of ~800. Great for covering a
breaker panel, or sliding behind a solar panel inverter or smart meter.
Attractive lightly brushed finish is very corrosion resistant, even at the
edges. Ships with PVC film on one side to help protect against scratching
during fabrication and in-stallation. Can be cut or bent with sheet metal
tools, and magnets will stick to it.
SHIELDENE®
Corrosion Resistant Magnetic Shield Plate (Cat. #A269) ............. $59.95 add
shieldene magnetic shield to cart
For each
parcel, a crate charge of $20 will be added. We can put 1-10 plates in a
parcel. Ships by UPS as oversize.
Breaker
Box shieldMagnetic shield for Breaker Box
Circuit
Breaker Shield
Decorative
Magnetic Shielding
A circuit
breaker box (or fuse box) in the bedroom, living room, kitchen, or other living
space can be a real problem. Strong magnetic field emissions (depending on how
much electric current is flowing) and electric field emissions can make the
nearby area hazardous to occupy, especially for long periods. Shielding is
certainly possible, but the shield must not hamper quick and easy access to the
controls inside the box.
If you
are handy, you can use the magnetic shielding materials listed below to make
your own hinged shield. If you want an easier solution, here it is. It’s a
picture (or poster) in a nice frame, with high performance Giron shielding
material behind the picture. Just put a nail above the breaker box and hang the
shielded picture where you need it. The bigger the shield, the better the
shielding. In our tests, a 2-foot section of Giron in a 24x36 inch frame
provided 50-70% reduction of magnetic field. If you need a shield larger than
what is suggested here (see this application note to determine how large your
shield should be), just contact us, we will be happy to assist you.
Bookmark
this page before you begin so you can find your way back.
magnet
shielding for Breaker Box Here is how to create your magnetic shield:
Step one:
Purchase
Giron, 25.5 inch wide x 24 inch
GIRON for
Poster (Cat. #A273-24P) ............... $97.90 add magnetic blocker to cart
Step two:
Get one
of the following, at least 24x36 inches:
Picture
Frame
Framed
Mirror
Dry Erase
Board, framed
Cork
Bulletin Board, Oak Frame
Obviously,
these are just examples. Get something you like.
Step three:
Get a
nice picture to put in the frame. Here is a nice one, but you can use any that
you like.
Put the
picture in the frame. Insert cardboard behind the picture. Insert Giron behind
the cardboard (careful as you handle it, the edges are sharp!). Use duct tape
to hold the Giron in place if needed. Position the Giron so it will be centered
over the magnetic “hotspot” on the wall. If you have room, insert another layer
of cardboard behind the Giron. Now hang your Picture! Final product weighs
about 9 pounds, depending on the frame you select.
Another
alternative is to mount the Giron directly on the wall and cover it with these
attractive interior window shutters. Click images below for more information or
to order through Amazon:
Affordable
window shutters are available in many sizes. A great way to add a decorative
touch over Giron shielding material for small areas.
Be sure
to order the quantity of Giron that you need before you click the links above:
GIRON (Cat. #A273) ............................... $48.95 per linear foot add
giron magnetic field shield to cart
Our
customers are telling us:
"I
just wanted to tell you the terrific results I got from using the Giron on the
back of a dry erase board to cover the 2 breaker boxes in my daughter's
apartment. In this small narrow kitchen, ( approx. 65 sq. ft.), the readings
were originally 15 - 30 mG throughout. After hanging the board, the readings
were 2 mG throughout. Quite the reduction! And, in the two bathrooms that are
situated behind the opposite wall from the breakers, the readings went from 5 -
15 mG, to 2 - 2.5 mG. I didn't expect this shield's effect to reach so far,
considering I had limited space to work with. Thank you for your help."
N.L.; New
York NY
GIRON
best magnetic shield
GIRON
Breakthrough
In Magnetic Shielding Flexibility
GIRON
Magnetic Shielding Film, which does not contain Nickel, is unlike any other
magnetic shielding material available on the market today. Suitable for high
field strength applications requiring high saturation and good permeability, it
is both thin and strong, and unlike Mu-metal™ it is very tolerant to bending or
shaping without losing its shielding properties.
GIRON
best magnet shielding GIRON is a woven, laminated material. Cuts neatly with
snips or sheet metal tools, and can be used either flat or molded into shapes
for best performance.
Suitable
for small shields on magnets, motors, speakers and appliances such as
refrigerators, vacuum cleaners etc. Also great for lining car floor or firewall.
Perfect for full or partial wall / floor shielding in rooms too! Can be glued,
taped, nailed, screwed or riveted into place. Could even be used to make a
(heavy weight) vest to shield a person's torso! Works with AC or DC magnetic
fields (0-1000 Hz), and will tolerate temperatures from 32° to 140°F. Laminated
with a 0.005 inch glass reinforced polypropylene tape which is UV sensitive,
cover if installation is exposed to direct sunlight.
GIRON
most effective magnetic shield
Initial
permeability: 500
Relative
permeability: 7000
Saturation
induction: 2,0 T
Curie
Temp.: 740°C (1364°F)
Weight is
approx 1 lb per square foot
Thickness:
0.9 mm (0.034 inch)
25.5 inch
wide, 1 mm thick. Weighs 3.5 Kg/m² (about 15 pounds per 10 foot length). Edges
are sharp!
GIRON (Cat.
#A273) ............................... $48.95 per linear foot add g-iron to cart
GIRON
full roll (81 feet) (Cat. #A273-roll) ... $3364.00 per roll add giron to cart
(Save 16%)
Tin Snips
for magnetic shielding
Tin Snips
"Great
for Cutting Magnetic Shielding Materials"
10 inch
long and heavy duty. Drop forged carbon steel, straight cutting. Double dipped
soft comfort grip. Just right when you need to cut magnetic shielding materials
including Giron, MagnetShield , and Magnetic Shielding Foil.
Tin Snips
(Cat. # A412) ..... $11.99 add mumetal foil snips to cart
SHIELDED
SWITCH PLATES AND OUTLET COVERS
Shielded
switch plate Reduce Emissions at the Source
Outlets
and switches can emit strong electric and magnetic fields. Conventional
shielding with mumetal is possible, but tricky because it’s hard to make it
look good, plus you need access to be able to use the switch/outlet. Now you
can simply replace your Switch Plate or Outlet Cover with these custom shielded
ones. Magnetic field reduction is 30 to 60% up close to the surface, depending
on wire configuration. For severe cases, you can stack a double layer to
achieve even better reduction. Electric field reduction is typically 75%.
Attractive polished chrome finish with a nice perimeter detail. Solid metal
(shielding alloy) and durable. Includes mounting screw(s). Two sizes: oversize
(3½x5½”) and super jumbo (5½x7½”) for maximum protection. Make sure you have
enough room between outlet and nearby moldings for these larger than standard
covers. Very economical!
shielded
outlet cover
Shielded
Switch Plate:
Oversize
(Cat. #A720) ................................ $9.95 each add shielded
switchplate to cart
Oversize, 10 pack (Cat. #A720-10) ................ $80.00 add magnetic shielded
switch plate to cart
Super
Jumbo (Cat. #A721) ........................ $29.95 each add magnetic switch
plate to cart
Super
Jumbo, 10 pack (Cat. #A721-10) ........ $250.00 add magnetically shielded
switchplate to cart
Shielded
Outlet Cover:
Oversize
(Cat. #A722) ................................ $9.95 each add shielded outlet
cover to cart
Oversize, 10 pack (Cat. #A722-10) ................ $80.00 add outlet cover
shielding to cart
Super
Jumbo (Cat. #A723) ........................ $29.95 each add mumetal outlet
cover to cart
Super Jumbo, 10 pack (Cat. #A723-10) ........ $250.00 add magnetic outlet cover
to cart
Oversize
Double Duplex shielded outlet coverOversize Double Duplex (Cat. #A724)
.................
...................................... $11.95 each add EMF
Shielded Outlet Cover to cart
Mu metal
Magnetic Shielding Foil
MAGNETIC
SHIELDING FOIL
"The
Best Material Available for Shielding DC, ELF & VLF Magnetic Fields"
Used for
years in industry to shield delicate electronic components from EMFs, this 80%
Nickel alloy magnetic shielding foil is now available at affordable prices for
home and office use. The thinner (0.004" thick) material is easy to trim
with scissors and shape by hand. Thicker material offers better shielding
performance but requires snips to cut. Can be formed into magnetic barriers on
cellular phones, microwave ovens, doorbell transformers, VDTs, buried wiring,
and more. With snug fitting shapes, get as much as 75% attenuation of the
magnetic field with one thickness. Use multiple layers for even greater
reduction. Foil is available in two thicknesses and can be ordered in any length.
(We recommend the use of a gaussmeter to determine the proper shape and
positioning of the magnetic shield, and to confirm that the fields have been
adequately reduced.) 12 or 15 inches wide CAUTION: Foil has
sharp edges!
Magnetic
Shielding Foil: 15" wide, 0.004" thick (Cat. # A276) .........
$24.95/linear ft add mumetal foil to cart
Magnetic
Shielding Foil: 15" wide, 0.010" thick (Cat. # A276-10) .....
$39.95/linear ft add mumetal foil to cart
Tin Snips
Tin Snips
for magnetic shielding"Great for Cutting Magnetic Shielding Materials"
10 inch
long and heavy duty. Drop forged carbon steel, straight cutting. Double dipped
soft comfort grip. Just right when you need to cut magnetic shielding materials
including Giron, MagnetShield, and Magnetic Shielding Foil.
Tin Snips
(Cat. # A412) ..... $11.99 add mumetal foil snips to cart
Magnetic
Shielding in carHow Can I Test Shielding Performance?
How Can I
Shield my Car?
Click
here for Specifications and Installation Notes
How much
is a linear foot?
magnetic
foil Linear Foot Image
Because
we offer so many different materials, of different widths, the easiest way to
order rolled goods is by specifying how long the piece of material will be. We
describe the length of the material purchased in linear feet. So, for example,
if you order 22 linear feet of a material, you will get a piece that is 22 feet
long x the width of the material. The width of each material is listed near the
end of the product description.
Mag-Stop
PlatesMag-Stop MuMetal magnetic shielding Plates
Mag-StopTM
Plates
Flat
surface magnetic shielding for large or small areas
Now
achieve excellent and affordable magnetic shielding in difficult situations!
Mag- Stop Plates are extra thick high-efficiency magnetic alloy (Mumetal®)
plates, specially designed to provide superior shielding for electric circuit
boxes, side by side computer users, and any situation where you need a flat
shielding material on a wall, floor, or ceiling. Can be mounted with ordinary
nails or screws, or sandwiched between the studs and dry-wall. Use zinc
chromate primer before painting. In one application, we were able to achieve
almost 95% attenuation of a 200 mG field!
The
24" wide "stress annealed" plates offer good magnetic shielding
and are also well-suited for forming into complicated shapes. The 30" wide
"fully hydrogen annealed" plates offer the best shielding available
(up to 10 times the shielding effectiveness of stress-annealed alloy) and
should not be soldered, welded, or heated in any way. Hydrogen annealed plates
have 2 small holes pre-drilled near one end which may be used for mounting.
Because of size and weight, additional shipping charges apply.
Application
Note for Joining Plates:
There are
two effective ways to achieve shielding continuity between multiple plates:
1]
overlap 2" at the joints, ensuring good metal-to-metal contact
or
2] butt
joints tightly and cover over the joints with Joint Shield (see diagram at
right) Joint Shield magnet shield
Mag-StopTM
Plates
Cat.
# Size
(W x L x
T inches) Approx.
Weight
Anneal
Type
Price
A277-0229
30 x 29 x
.020"
6 lbs.
Hydrogen
$548.00
add magnetic shielding metal to cart
A277-0259
30 x 59 x
.020"
12 lbs.
$1056.00
add magnetic field shielding plates to cart
A277-0429
30 x 29 x
.040"
11 lbs.
$1046.00
add shielding for magnetic fields to cart
A277-0459
30 x 59 x
.040"
23 lbs.
$2011.00
add shield for a magnet to cart
A277-0629
30 x 29 x
.062"
17 lbs.
$1591.00
add how to shield a magnet to cart
A277-0659
30 x 59 x
.062"
35 lbs.
$3061.00
add how to do magnetic shielding to cart
Click
here for Specs on Hydrogen Annealed Plates
A277-0224
24 x 120
x .020"
19 lbs.
Stress
$1194.00
add annealed magnetic shield to cart
A277-0424
24 x 120
x .040"
38 lbs.
$2388.00
add stress annealed to cart
A277-0624
24 x 120
x .062"
57 lbs.
$3583.00
add hydrogen annealed to cart
We can
pre-cut plates into 2 or more pieces for you.
Note that
these plates are 10 feet long and ship by truck. Online shipping estimator will
not be correct.
Contact
us if you have questions about ship costs.
how to
shield magnetic field, 2 mG line
Application
Note: How Much Area Do I need to Cover?
The
amount of shielding that you will achieve depends on many factors, including
the size and shape of the shield. When using a flat shield on a wall, floor, or
ceiling to shield a source of field that is close to the shield (within 8
inches), plan to cover an area that extends at least to the 2 mG line.
Method:
1- Using
your gaussmeter, slide along the surface of the wall to locate the hot spot to
be shielded.
2- Now
slide the gaussmeter to the right, to the left, up, and down to identify how
far you must shield to get to the 2 mG line.
Make sure
to check for additional sources of magnetic field (lights, wiring, appliances
and so on), that may be located inside adjacent walls, floor, ceiling or within
the same room.
Click
here for a short instructional video on doing a magnetic field survery for
shield design.
IMPORTANT
NOTICE:
While the
special alloys in Magnetic Shielding Foil, Mag-Stop Plates, Joint Shield, and
Metglas, exhibit high magnetic permeability, there are many factors which
affect the amount of magnetic shielding you will achieve by using these
materials. The list of such factors includes: size and shape of the source of
the magnetic field, size and shape of the shielded area, seams in the shielding
material, frequency of the magnetic field, distance from shield to source,
orientation of shield to the source, thickness and heat treatment of shielding
material, etc.
Because
we have no control over many of these factors, we cannot and do not guarantee
any specific shielding performance for a specific application of these
materials. Also, note that foils, ribbons and plates, once cut by us to your
specifications, are not refundable.
Here are
some basic guidelines for shield design on a circuit box to get you started:
1]
Naturally, you must first make measurements of the magnetic fields, which are
present. Remember to make measurements under various conditions, as the
readings will change according to how much electric current is flowing at the
time of the reading. Also, find out if there are other sources, such as wiring
leading to the circuit box, nearby fluorescent lights, etc.
2]
Determine how much attenuation (reduction) you want. This will influence the
choice for thickness of the Mag-Stop Plate shield, or the number of layers
used. Most would recommend that you achieve readings of 2.5 mG or less in areas
where people will be spending a lot of time.
3] In
general, you will extend the shield at least 2 feet beyond the size of the
circuit box (or other fairly concentrated source), in all directions. The
distance from the shield to the box will be a factor.
4]
Remember that you will end up concentrating the field at the edges of the
shield. In other words, the field will be stronger at the edge of the shield as
compared to having no shield at all. So think about positioning the edges away
from where the people are likely to be.
5] Also
remember that you will achieve the greatest % reduction up close to the center
of the shield (where the field is strongest anyway). As you back away from the
shield, the % reduction decreases.
6]
Finally, for large shields, one must take saturation into account. This occurs
when the Earth's magnetic field (about 400 mG) interacts with a large shield,
reducing its effectiveness, unless special "high saturation"
(MagnetShield) shielding alloys are incorporated into the design.
In the
end, some experimenting is often necessary to ensure proper shield thickness
and placement.
If you
are still not sure how to use these materials, you may call us for suggestions
or we may even be able to locate the name of an experienced shielding
designer/installer in your area who can assist in designing your shield.
JOINT-SHIELD™
Joint-Shield
magnetic shielding tape
Another
format of MuMetal®, great for Magnetic Shield Prototyping and for Joining
Mag-Stop™ Plates
When you
need more than one Mag-Stop Plate to cover an area, how do you handle the
joints? Joint-Shield is the perfect solution! This is a generous .010"
thick, fully hydrogen annealed magnetic shielding alloy with adhesive backing
(rated 0 - 200°F) on one side. Simply butt the Mag-Stop plates tightly
together, and "tape" over the seam with Joint-Shield high permeabilty
alloy. This method offers much less bulk and better appearance than the old
overlap technique and provides excellent shielding integrity. Simple to use:
just cut to desired length with a heavy scissors, peel the protective backing
and press into place!
Joint-Shield
can also be used by itself as an excellent magnetic shielding material when a
4" width and adhesive backing is desirable (wrap it around wiring and
conduit, speaker magnets, even small appliances like shavers and hair dryers!).
Joint-Shield can be shaped by hand, without the need for special tools, but
watch the sharp edges.
Click here
for Specs on Joint Shield
4 inch
wide. Specify desired length when ordering.
Joint
Shield (Cat. #A277) .................................. $39.95/linear foot add
jointshield magnetic tape to cart
Joint
Shield [100 ft roll] (Cat. #A277-roll) ...................... $3595.50 add
joint shield magnetic shielding adhesive tape to cart
FINEMET®
Wide Format Film
Finemet
magnetic shielding film
Ultra-Light
Weight, Wide Format, Flexible Magnetic Shielding
Combining
high performance nanocrystalline magnetic shielding alloy sandwiched between
layers of clear PET to achieve good performance and easy handling. Very light
weight and flexible, easily trimmed with scissors this material will provide
good high frequency magnetic shielding for moderate to low intensity fields
below 1000 kHz. Tolerates bending very well. Finemet magnetic shield
Performance Stack multiple layers to improve shielding performance. Maximum
permeability: 70,000. Maximum flux density: 1.13T. Only 0.12 mm thick (5 mil)
and 470 mm (18.5”) wide. 0.052 lb/ft². Hitachi Part #MS-FR 470-100M-T0
Specify
desired length when ordering.
May have
splices.
FINEMET
(Cat. #A271) ...................... $22.28 per lin foot add finemet to cart
FINEMET
Full Roll (100 meters) (Cat. #A271-roll) … $5430.00 (about $16.70 per foot) add
finemet high frequency magnetic shield to cart
[ S.O.S.
: --> ] Intro to Electrosmog & deswitching
Jun. 6,
2014 at 2:28 p.m.
PrintRaw
message
'Dina
Galassini' dinarose@cox.net [sound_of_stars] <sound_of_stars@yahoogroups.com>
To: sound_of_stars@yahoogroups.com
If you
forward, please delete ALL email addresses above and below. Thanks.
Here’s a
.pdf chart that helps people to understand the simple connection between the
whole wireless society and their mental states and health challenges.
Download
brainwave and frequency model
Bioinitiative
Report 2012
A
Rationale for Biologically-based Public Exposure Standards for Electromagnetic
Fields (ELF and RF)
http://www.bioinitiative.org/
The
BioInitiative 2012 Report has been prepared by 29 authors from ten countries,
ten holding medical degrees (MDs), 21 PhDs, and three MsC, MA or MPHs. Among
the authors are three former presidents of the Bioelectromagnetics Society, and
five full members of BEMS.
WHY THEY
CARE
The
stakes are very high. Human beings are bioelectrical systems. Our hearts and
brains are regulated by internal bioelectrical signals. Environmental exposures
to artificial EMFs can interact with fundamental biological processes in the
human body.
There is
more evidence than we need. The last five years worth of new scientific studies
tell us the situation is much worse than in 2007 and yet people around the
world have so much more daily exposure than even five years ago.
One of
their reports include this statement and it was underlined for emphasis:
http://www.bioinitiative.org/report/wp-content/uploads/pdfs/RFR-free-radical-abstracts.pdf
Results
suggest that exposure to electromagnetic radiation may exert an oxidative
stress on human cells as evidenced by the
increase
in the concentration of the superoxide radical anion released in the saliva of
cell phone users.
Unsurprising
enough, US doesn’t recognize electrosmog as a health threat. Please listen to
Dr. Doepp and see if he makes sense to you.
Dr.
Doepp: Introduction 1 of 3 to Electrosmog Protection
http://www.youtube.com/watch?v=fDiafJfwf8A&list=PL1E82B9AF055A0B9B
After you
listen to the 3 videos, Dr. Doepp talks about “deswitching”, go here:
Deswitch
the World with 8 easy exercises Now
http://www.youtube.com/watch?v=n0Sg6BZAUU8
HOW
FREQUENCY MIND CONTROL IS PUMPED INTO HOMES
Electromagnetic
Frequency Mind Control Weapons ⇝ Dr Patrick Flanagan
https://www.youtube.com/watch?v=Mw3_ayYGwjs
PARANORMAL
& CONSCIOUSNESS : INSPIRATIONAL BITS, APPLICATIONS, ENGINEERING, TOOLS,
INSTRUMENTS
https://www.youtube.com/playlist?list=PL9-HzPUvd0lSeFntFD6NEsa7putUDTHIq
DANGEROUS
FREQUENCIES : EFFECT ON LIFE, ElectroSmog, Smart Meters Danger, Wifi, EMF
Protection
https://www.youtube.com/playlist?list=PL9-HzPUvd0lSe5jXfsof1wQQFoUcYvJC3
PHENOMENA
OF FREQUENCY
https://www.youtube.com/playlist?list=PL9-HzPUvd0lQHitDEVl0yVv_x6KoheBtv
EMF PROTECTION
Apr. 8,
2018 at 12:53 a.m.
PrintRaw
message
Doc Stars
<doc_starz@yahoo.com>
To:
doc_starz@yahoo.com
Thank you
for your interest. Its important to understand that our
frequencies
do not offer full protection against all EMF noise
pollution,
however from our tests and independent studies and
experiments
we strongly believe that they function well in
re-cohering
patterns of vitality in compromised tissues and
environments.
Our members and one German clinic have documented this in reports, photographs
and similiar which
you can
review first hand on out site. Damage to organisms
from
external EMF fields occur along a number of vectors such
as
chaotic EMF noise and thermal fluctuations. Tissue in
toxic
environments has been found to sustain vitality and even
regenerate
when supported by our frequencies. All of our
frequencies
are entirely experimental to date and are not
approved
by medical authorities such as the FDA. If you
wish to dramatically
increase your protection against harmful
EMF we
suggest that in addition to using our frequencies you
also use
fllexible mesh screen style faraday cages / enclosures
such as
those provide by the online company called '
"LESSEMF.COM"
And or you
consider using MU metal sheeting to protect against
the
magnetic field component of EMF pollution.
I cant
say I agree with the person responding to your questions, except the part about
transformers.
Generally
this is not good, the closer the lines the worse it is
You have
to worry about two parts ; the electric and magnetic field
The
magnetic field is harder to shield from altho it has less propagation distance,
only certain materials such as mu metal
can block
mag fields
There can
be some small variance in electro-pollution leaking from lines, this is related
to factors like how are the lines insulated, are they old or new lines, how far
are the lines from you
Most
power lines will be standardized to a local municipality, some places having
older infrastructure may be slightly different from newer places, but the power
/ current out put from most lines are
not
something you want to have in close proximity
You can
shield the electrical field more easily at least, if you are stuck in such a
place I would at the very least recommend that you
protect
yourself while you sleep, you can use something like
a bed
canopy style fabric based faraday cage, for solutions
like
these see ;
http://lessemf.com/
--------------------------------------------
On Sun,
5/19/19, Msenlightened1 <enlightened_divinity@ > wrote:
Subject:
Re: 50% OFF - FREQUENCIES : SOUND OF STARS
To:
"Donald Adams" <donald.adams@soundofstars.org>
Received:
Sunday, May 19, 2019, 1:42 PM
Good Day
Donald…What
do you know about
living
under power lines? I believe they can be a good and bad
thing?Question:
Dear
Kryon, I
have just purchased a new home and found out that
there are
electric power lines at the back of the property.
It's
nearly an acre, so the lines are not directly over
my house,
but still about 50 yards away on my property.
Should I
be concerned about the electro-magnetics and their
effect on
my family?
Answer:
Each problem of this sort is unique. What
power do
they carry, and how often? Are they high or low
energy
power lines? If they can move a compass from your
back
door, then they are inappropriate for your life. The
distance,
however, is the key here. The ones you have will
be fine.
They are far enough away.
Now…
about that transformer that is
close to
the house…
FARDAY CAGE
EQUIPMENT NOTES LINKS suppliers lessemf
Apr. 30
at 1:02 p.m.
PrintRaw
message
Doc Stars
<doc_starz@yahoo.com>
To:
doc_starz@yahoo.com
https://www.pcmag.com/article/335782/how-to-make-your-own-faraday-cage
https://thesurvivalmom.com/why-and-how-to-protect-your-gear-from-emp/
https://www.thereadystore.com/diy/9713/building-your-own-faraday-cage/
https://www.nontoxicliving.tips/blog/what-you-need-to-know-about-emf-protection-products
https://www.washingtonpost.com/local/police-say-suspect-foiled-monitoring-device/2013/01/26/8511de50-681b-11e2-85f5-a8a9228e55e7_story.html?noredirect=on&utm_term=.d62239004b63
https://www.nontoxicliving.tips/detox-your-emfs-with-the-best-digital-detox
===========
http://lessemf.com/mag-shld.html
http://lessemf.com/paint.html
Application
Note: How Much Area Do I need to Cover?
The
amount of shielding that you will achieve depends on many factors, including
the size and shape of the shield. When using a flat shield on a wall, floor, or
ceiling to shield a source of field that is close to the shield (within 8
inches), plan to cover an area that extends at least to the 2 mG line.
Method:
1- Using
your gaussmeter, slide along the surface of the wall to locate the hot spot to
be shielded.
2- Now
slide the gaussmeter to the right, to the left, up, and down to identify how
far you must shield to get to the 2 mG line.
Make sure
to check for additional sources of magnetic field (lights, wiring, appliances
and so on), that may be located inside adjacent walls, floor, ceiling or within
the same room.
Click
here for a short instructional video on doing a magnetic field survery for
shield design.
http://lessemf.com/surveyanimation.html
Learn how
to shield magnetic fields. Download our free Guidelines For Installing Magnetic
Shielding
Shielding
FAQs More answers to Magnetic Shielding Questions
Sorry, no
returns on cut goods. See Return Policy
Which
magnetic shielding material should I use?
For
strong fields
(over 1
Gauss):
high
saturation, low permeability alloys
For weak or
moderate fields
(milliGauss
levels):
low
saturation, high permeability alloys
For high
frequency fields:
Giron
(best performance, large format)
MagnetShield
(good performance)
Shieldene®
Corrosion Resistant (good performance)
PaperShield
(low performance)
Speaker
Magnet Shield (small magnets) Magnetic Shielding Foil
Mag-Stop
Plates (large format)
JointShield
(adhesive on one side)
MuMetal
Wire
MuMetal
Rod
EMP Can
Finemet (kHz range)
CobalTex
(MHz range)
Still
can't decide? Consider our Magnetic Shielding Alloy Sampler
SHIELDENE®
CORROSION RESISTANT MAGNETIC SHIELD PLATE
SHIELDENE
Corrosion Resistant Magnetic Shield PlateSHIELDENE Magnet Shielding Plate
Perfect
Size for Many Projects, Indoors or Outdoors
Need to
cover a large area? Worried about rusting? This material is an excellent choice
for moderate magnetic shielding (permeability ~1000) when cost is the major
consideration. Large 24 x 48 x 0.0235 inch format, weighs less than 8 pounds
per sheet, and delivers up to 80% magnetic field reduction when size and
position are optimized. Magnetic Permeability of ~800. Great for covering a
breaker panel, or sliding behind a solar panel inverter or smart meter.
Attractive lightly brushed finish is very corrosion resistant, even at the
edges. Ships with PVC film on one side to help protect against scratching
during fabrication and in-stallation. Can be cut or bent with sheet metal
tools, and magnets will stick to it.
SHIELDENE®
Corrosion Resistant Magnetic Shield Plate (Cat. #A269) ............. $59.95 add
shieldene magnetic shield to cart
For each
parcel, a crate charge of $20 will be added. We can put 1-10 plates in a
parcel. Ships by UPS as oversize.
Breaker
Box shieldMagnetic shield for Breaker Box
Circuit
Breaker Shield
Decorative
Magnetic Shielding
A circuit
breaker box (or fuse box) in the bedroom, living room, kitchen, or other living
space can be a real problem. Strong magnetic field emissions (depending on how
much electric current is flowing) and electric field emissions can make the
nearby area hazardous to occupy, especially for long periods. Shielding is
certainly possible, but the shield must not hamper quick and easy access to the
controls inside the box.
If you
are handy, you can use the magnetic shielding materials listed below to make
your own hinged shield. If you want an easier solution, here it is. It’s a
picture (or poster) in a nice frame, with high performance Giron shielding
material behind the picture. Just put a nail above the breaker box and hang the
shielded picture where you need it. The bigger the shield, the better the
shielding. In our tests, a 2-foot section of Giron in a 24x36 inch frame
provided 50-70% reduction of magnetic field. If you need a shield larger than
what is suggested here (see this application note to determine how large your
shield should be), just contact us, we will be happy to assist you.
Bookmark
this page before you begin so you can find your way back.
magnet
shielding for Breaker Box Here is how to create your magnetic shield:
Step one:
Purchase
Giron, 25.5 inch wide x 24 inch
GIRON for
Poster (Cat. #A273-24P) ............... $97.90 add magnetic blocker to cart
Step two:
Get one
of the following, at least 24x36 inches:
Picture
Frame
Framed
Mirror
Dry Erase
Board, framed
Cork
Bulletin Board, Oak Frame
Obviously,
these are just examples. Get something you like.
Step
three:
Get a
nice picture to put in the frame. Here is a nice one, but you can use any that
you like.
Put the
picture in the frame. Insert cardboard behind the picture. Insert Giron behind
the cardboard (careful as you handle it, the edges are sharp!). Use duct tape
to hold the Giron in place if needed. Position the Giron so it will be centered
over the magnetic “hotspot” on the wall. If you have room, insert another layer
of cardboard behind the Giron. Now hang your Picture! Final product weighs
about 9 pounds, depending on the frame you select.
Another
alternative is to mount the Giron directly on the wall and cover it with these
attractive interior window shutters. Click images below for more information or
to order through Amazon:
Affordable
window shutters are available in many sizes. A great way to add a decorative
touch over Giron shielding material for small areas.
Be sure
to order the quantity of Giron that you need before you click the links above:
GIRON (Cat. #A273) ............................... $48.95 per linear foot add
giron magnetic field shield to cart
Our
customers are telling us:
"I
just wanted to tell you the terrific results I got from using the Giron on the
back of a dry erase board to cover the 2 breaker boxes in my daughter's
apartment. In this small narrow kitchen, ( approx. 65 sq. ft.), the readings
were originally 15 - 30 mG throughout. After hanging the board, the readings
were 2 mG throughout. Quite the reduction! And, in the two bathrooms that are
situated behind the opposite wall from the breakers, the readings went from 5 -
15 mG, to 2 - 2.5 mG. I didn't expect this shield's effect to reach so far,
considering I had limited space to work with. Thank you for your help."
N.L.; New
York NY
GIRON
best magnetic shield
GIRON
Breakthrough
In Magnetic Shielding Flexibility
GIRON
Magnetic Shielding Film, which does not contain Nickel, is unlike any other
magnetic shielding material available on the market today. Suitable for high
field strength applications requiring high saturation and good permeability, it
is both thin and strong, and unlike Mu-metal™ it is very tolerant to bending or
shaping without losing its shielding properties.
GIRON
best magnet shielding GIRON is a woven, laminated material. Cuts neatly with
snips or sheet metal tools, and can be used either flat or molded into shapes
for best performance.
Suitable
for small shields on magnets, motors, speakers and appliances such as
refrigerators, vacuum cleaners etc. Also great for lining car floor or
firewall. Perfect for full or partial wall / floor shielding in rooms too! Can
be glued, taped, nailed, screwed or riveted into place. Could even be used to
make a (heavy weight) vest to shield a person's torso! Works with AC or DC
magnetic fields (0-1000 Hz), and will tolerate temperatures from 32° to 140°F.
Laminated with a 0.005 inch glass reinforced polypropylene tape which is UV
sensitive, cover if installation is exposed to direct sunlight.
GIRON
most effective magnetic shield
Initial
permeability: 500
Relative
permeability: 7000
Saturation
induction: 2,0 T
Curie
Temp.: 740°C (1364°F)
Weight is
approx 1 lb per square foot
Thickness:
0.9 mm (0.034 inch)
25.5 inch
wide, 1 mm thick. Weighs 3.5 Kg/m² (about 15 pounds per 10 foot length). Edges
are sharp!
GIRON
(Cat. #A273) ............................... $48.95 per linear foot add g-iron
to cart
GIRON
full roll (81 feet) (Cat. #A273-roll) ... $3364.00 per roll add giron to cart
(Save 16%)
Tin Snips
for magnetic shielding
Tin Snips
"Great
for Cutting Magnetic Shielding Materials"
10 inch
long and heavy duty. Drop forged carbon steel, straight cutting. Double dipped
soft comfort grip. Just right when you need to cut magnetic shielding materials
including Giron, MagnetShield , and Magnetic Shielding Foil.
Tin Snips
(Cat. # A412) ..... $11.99 add mumetal foil snips to cart
SHIELDED
SWITCH PLATES AND OUTLET COVERS
Shielded
switch plate Reduce Emissions at the Source
Outlets
and switches can emit strong electric and magnetic fields. Conventional
shielding with mumetal is possible, but tricky because it’s hard to make it
look good, plus you need access to be able to use the switch/outlet. Now you
can simply replace your Switch Plate or Outlet Cover with these custom shielded
ones. Magnetic field reduction is 30 to 60% up close to the surface, depending
on wire configuration. For severe cases, you can stack a double layer to
achieve even better reduction. Electric field reduction is typically 75%.
Attractive polished chrome finish with a nice perimeter detail. Solid metal
(shielding alloy) and durable. Includes mounting screw(s). Two sizes: oversize
(3½x5½”) and super jumbo (5½x7½”) for maximum protection. Make sure you have
enough room between outlet and nearby moldings for these larger than standard
covers. Very economical!
shielded
outlet cover
Shielded
Switch Plate:
Oversize
(Cat. #A720) ................................ $9.95 each add shielded
switchplate to cart
Oversize,
10 pack (Cat. #A720-10) ................ $80.00 add magnetic shielded switch
plate to cart
Super
Jumbo (Cat. #A721) ........................ $29.95 each add magnetic switch
plate to cart
Super
Jumbo, 10 pack (Cat. #A721-10) ........ $250.00 add magnetically shielded
switchplate to cart
Shielded
Outlet Cover:
Oversize
(Cat. #A722) ................................ $9.95 each add shielded outlet
cover to cart
Oversize,
10 pack (Cat. #A722-10) ................ $80.00 add outlet cover shielding to
cart
Super
Jumbo (Cat. #A723) ........................ $29.95 each add mumetal outlet
cover to cart
Super
Jumbo, 10 pack (Cat. #A723-10) ........ $250.00 add magnetic outlet cover to
cart
Oversize
Double Duplex shielded outlet coverOversize Double Duplex (Cat. #A724)
.................
......................................
$11.95 each add EMF Shielded Outlet Cover to cart
Mu metal
Magnetic Shielding Foil
MAGNETIC
SHIELDING FOIL
"The
Best Material Available for Shielding DC, ELF & VLF Magnetic Fields"
Used for years
in industry to shield delicate electronic components from EMFs, this 80% Nickel
alloy magnetic shielding foil is now available at affordable prices for home
and office use. The thinner (0.004" thick) material is easy to trim with
scissors and shape by hand. Thicker material offers better shielding
performance but requires snips to cut. Can be formed into magnetic barriers on
cellular phones, microwave ovens, doorbell transformers, VDTs, buried wiring,
and more. With snug fitting shapes, get as much as 75% attenuation of the
magnetic field with one thickness. Use multiple layers for even greater
reduction. Foil is available in two thicknesses and can be ordered in any
length. (We recommend the use of a gaussmeter to determine the proper shape and
positioning of the magnetic shield, and to confirm that the fields have been
adequately reduced.) 12 or 15 inches wide CAUTION: Foil has sharp edges!
Magnetic
Shielding Foil: 15" wide, 0.004" thick (Cat. # A276) .........
$24.95/linear ft add mumetal foil to cart
Magnetic
Shielding Foil: 15" wide, 0.010" thick (Cat. # A276-10) .....
$39.95/linear ft add mumetal foil to cart
Tin Snips
Tin Snips
for magnetic shielding"Great for Cutting Magnetic Shielding Materials"
10 inch
long and heavy duty. Drop forged carbon steel, straight cutting. Double dipped
soft comfort grip. Just right when you need to cut magnetic shielding materials
including Giron, MagnetShield, and Magnetic Shielding Foil.
Tin Snips
(Cat. # A412) ..... $11.99 add mumetal foil snips to cart
Magnetic
Shielding in carHow Can I Test Shielding Performance?
How Can I
Shield my Car?
Click
here for Specifications and Installation Notes
How much
is a linear foot?
magnetic
foil Linear Foot Image
Because
we offer so many different materials, of different widths, the easiest way to
order rolled goods is by specifying how long the piece of material will be. We
describe the length of the material purchased in linear feet. So, for example,
if you order 22 linear feet of a material, you will get a piece that is 22 feet
long x the width of the material. The width of each material is listed near the
end of the product description.
Mag-Stop
PlatesMag-Stop MuMetal magnetic shielding Plates
Mag-StopTM
Plates
Flat
surface magnetic shielding for large or small areas
Now
achieve excellent and affordable magnetic shielding in difficult situations!
Mag- Stop Plates are extra thick high-efficiency magnetic alloy (Mumetal®)
plates, specially designed to provide superior shielding for electric circuit
boxes, side by side computer users, and any situation where you need a flat
shielding material on a wall, floor, or ceiling. Can be mounted with ordinary
nails or screws, or sandwiched between the studs and dry-wall. Use zinc
chromate primer before painting. In one application, we were able to achieve
almost 95% attenuation of a 200 mG field!
The
24" wide "stress annealed" plates offer good magnetic shielding
and are also well-suited for forming into complicated shapes. The 30" wide
"fully hydrogen annealed" plates offer the best shielding available
(up to 10 times the shielding effectiveness of stress-annealed alloy) and
should not be soldered, welded, or heated in any way. Hydrogen annealed plates
have 2 small holes pre-drilled near one end which may be used for mounting.
Because of size and weight, additional shipping charges apply.
Application
Note for Joining Plates:
There are
two effective ways to achieve shielding continuity between multiple plates:
1]
overlap 2" at the joints, ensuring good metal-to-metal contact
or
2] butt
joints tightly and cover over the joints with Joint Shield (see diagram at
right) Joint Shield magnet shield
Mag-StopTM
Plates
Cat. #
Size
(W x L x
T inches) Approx.
Weight
Anneal
Type Price
A277-0229
30 x 29 x
.020"
6 lbs.
Hydrogen
$548.00 add
magnetic shielding metal to cart
A277-0259
30 x 59 x
.020"
12 lbs.
$1056.00
add magnetic field shielding plates to cart
A277-0429
30 x 29 x
.040"
11 lbs.
$1046.00
add shielding for magnetic fields to cart
A277-0459
30 x 59 x
.040"
23 lbs.
$2011.00
add shield for a magnet to cart
A277-0629
30 x 29 x
.062"
17 lbs.
$1591.00
add how to shield a magnet to cart
A277-0659
30 x 59 x
.062"
35 lbs.
$3061.00
add how to do magnetic shielding to cart
Click
here for Specs on Hydrogen Annealed Plates
A277-0224
24 x 120
x .020"
19 lbs.
Stress
$1194.00
add annealed magnetic shield to cart
A277-0424
24 x 120
x .040"
38 lbs.
$2388.00
add stress annealed to cart
A277-0624
24 x 120
x .062"
57 lbs.
$3583.00 add
hydrogen annealed to cart
We can
pre-cut plates into 2 or more pieces for you.
Note that
these plates are 10 feet long and ship by truck. Online shipping estimator will
not be correct.
Contact
us if you have questions about ship costs.
how to
shield magnetic field, 2 mG line
Application
Note: How Much Area Do I need to Cover?
The
amount of shielding that you will achieve depends on many factors, including
the size and shape of the shield. When using a flat shield on a wall, floor, or
ceiling to shield a source of field that is close to the shield (within 8
inches), plan to cover an area that extends at least to the 2 mG line.
Method:
1- Using
your gaussmeter, slide along the surface of the wall to locate the hot spot to
be shielded.
2- Now
slide the gaussmeter to the right, to the left, up, and down to identify how
far you must shield to get to the 2 mG line.
Make sure
to check for additional sources of magnetic field (lights, wiring, appliances
and so on), that may be located inside adjacent walls, floor, ceiling or within
the same room.
Click
here for a short instructional video on doing a magnetic field survery for
shield design.
IMPORTANT
NOTICE:
While the
special alloys in Magnetic Shielding Foil, Mag-Stop Plates, Joint Shield, and
Metglas, exhibit high magnetic permeability, there are many factors which
affect the amount of magnetic shielding you will achieve by using these
materials. The list of such factors includes: size and shape of the source of
the magnetic field, size and shape of the shielded area, seams in the shielding
material, frequency of the magnetic field, distance from shield to source,
orientation of shield to the source, thickness and heat treatment of shielding
material, etc.
Because
we have no control over many of these factors, we cannot and do not guarantee
any specific shielding performance for a specific application of these
materials. Also, note that foils, ribbons and plates, once cut by us to your
specifications, are not refundable.
Here are
some basic guidelines for shield design on a circuit box to get you started:
1]
Naturally, you must first make measurements of the magnetic fields, which are
present. Remember to make measurements under various conditions, as the
readings will change according to how much electric current is flowing at the
time of the reading. Also, find out if there are other sources, such as wiring
leading to the circuit box, nearby fluorescent lights, etc.
2]
Determine how much attenuation (reduction) you want. This will influence the
choice for thickness of the Mag-Stop Plate shield, or the number of layers
used. Most would recommend that you achieve readings of 2.5 mG or less in areas
where people will be spending a lot of time.
3] In
general, you will extend the shield at least 2 feet beyond the size of the
circuit box (or other fairly concentrated source), in all directions. The
distance from the shield to the box will be a factor.
4]
Remember that you will end up concentrating the field at the edges of the
shield. In other words, the field will be stronger at the edge of the shield as
compared to having no shield at all. So think about positioning the edges away
from where the people are likely to be.
5] Also
remember that you will achieve the greatest % reduction up close to the center
of the shield (where the field is strongest anyway). As you back away from the
shield, the % reduction decreases.
6]
Finally, for large shields, one must take saturation into account. This occurs
when the Earth's magnetic field (about 400 mG) interacts with a large shield,
reducing its effectiveness, unless special "high saturation"
(MagnetShield) shielding alloys are incorporated into the design.
In the
end, some experimenting is often necessary to ensure proper shield thickness
and placement.
If you
are still not sure how to use these materials, you may call us for suggestions
or we may even be able to locate the name of an experienced shielding
designer/installer in your area who can assist in designing your shield.
JOINT-SHIELD™
Joint-Shield
magnetic shielding tape
Another
format of MuMetal®, great for Magnetic Shield Prototyping and for Joining
Mag-Stop™ Plates
When you
need more than one Mag-Stop Plate to cover an area, how do you handle the
joints? Joint-Shield is the perfect solution! This is a generous .010"
thick, fully hydrogen annealed magnetic shielding alloy with adhesive backing
(rated 0 - 200°F) on one side. Simply butt the Mag-Stop plates tightly
together, and "tape" over the seam with Joint-Shield high permeabilty
alloy. This method offers much less bulk and better appearance than the old
overlap technique and provides excellent shielding integrity. Simple to use:
just cut to desired length with a heavy scissors, peel the protective backing
and press into place!
Joint-Shield
can also be used by itself as an excellent magnetic shielding material when a
4" width and adhesive backing is desirable (wrap it around wiring and
conduit, speaker magnets, even small appliances like shavers and hair dryers!).
Joint-Shield can be shaped by hand, without the need for special tools, but
watch the sharp edges.
Click
here for Specs on Joint Shield
4 inch
wide. Specify desired length when ordering.
Joint
Shield (Cat. #A277) .................................. $39.95/linear foot add
jointshield magnetic tape to cart
Joint
Shield [100 ft roll] (Cat. #A277-roll) ...................... $3595.50 add
joint shield magnetic shielding adhesive tape to cart
FINEMET®
Wide Format Film
Finemet
magnetic shielding film
Ultra-Light
Weight, Wide Format, Flexible Magnetic Shielding
Combining
high performance nanocrystalline magnetic shielding alloy sandwiched between
layers of clear PET to achieve good performance and easy handling. Very light
weight and flexible, easily trimmed with scissors this material will provide good
high frequency magnetic shielding for moderate to low intensity fields below
1000 kHz. Tolerates bending very well. Finemet magnetic shield Performance
Stack multiple layers to improve shielding performance. Maximum permeability:
70,000. Maximum flux density: 1.13T. Only 0.12 mm thick (5 mil) and 470 mm
(18.5”) wide. 0.052 lb/ft². Hitachi Part #MS-FR 470-100M-T0
Specify
desired length when ordering.
May have
splices.
FINEMET
(Cat. #A271) ...................... $22.28 per lin foot add finemet to cart
FINEMET
Full Roll (100 meters) (Cat. #A271-roll) … $5430.00 (about $16.70 per foot) add
finemet high frequency magnetic shield to cart
[ S.O.S.
: --> ] Intro to Electrosmog & deswitching
Jun. 6,
2014 at 2:28 p.m.
PrintRaw
message
'Dina
Galassini' dinarose@ [sound_of_stars] <sound_of_stars@yahoogroups.com>
To:
sound_of_stars@yahoogroups.com
If you
forward, please delete ALL email addresses above and below. Thanks.
Here’s a
.pdf chart that helps people to understand the simple connection between the
whole wireless society and their mental states and health challenges.
Download
brainwave and frequency model
Bioinitiative
Report 2012
A
Rationale for Biologically-based Public Exposure Standards for Electromagnetic
Fields (ELF and RF)
http://www.bioinitiative.org/
The
BioInitiative 2012 Report has been prepared by 29 authors from ten countries,
ten holding medical degrees (MDs), 21 PhDs, and three MsC, MA or MPHs. Among
the authors are three former presidents of the Bioelectromagnetics Society, and
five full members of BEMS.
WHY THEY
CARE
The
stakes are very high. Human beings are bioelectrical systems. Our hearts and
brains are regulated by internal bioelectrical signals. Environmental exposures
to artificial EMFs can interact with fundamental biological processes in the
human body.
There is
more evidence than we need. The last five years worth of new scientific studies
tell us the situation is much worse than in 2007 and yet people around the
world have so much more daily exposure than even five years ago.
One of
their reports include this statement and it was underlined for emphasis:
http://www.bioinitiative.org/report/wp-content/uploads/pdfs/RFR-free-radical-abstracts.pdf
Results
suggest that exposure to electromagnetic radiation may exert an oxidative
stress on human cells as evidenced by the
increase
in the concentration of the superoxide radical anion released in the saliva of
cell phone users.
Unsurprising
enough, US doesn’t recognize electrosmog as a health threat. Please listen to
Dr. Doepp and see if he makes sense to you.
Dr.
Doepp: Introduction 1 of 3 to Electrosmog Protection
http://www.youtube.com/watch?v=fDiafJfwf8A&list=PL1E82B9AF055A0B9B
After you
listen to the 3 videos, Dr. Doepp talks about “deswitching”, go here:
Deswitch
the World with 8 easy exercises Now
http://www.youtube.com/watch?v=n0Sg6BZAUU8
HOW
FREQUENCY MIND CONTROL IS PUMPED INTO HOMES
Electromagnetic
Frequency Mind Control Weapons ⇝ Dr Patrick Flanagan
https://www.youtube.com/watch?v=Mw3_ayYGwjs
PARANORMAL
& CONSCIOUSNESS : INSPIRATIONAL BITS, APPLICATIONS, ENGINEERING, TOOLS,
INSTRUMENTS
https://www.youtube.com/playlist?list=PL9-HzPUvd0lSeFntFD6NEsa7putUDTHIq
DANGEROUS
FREQUENCIES : EFFECT ON LIFE, ElectroSmog, Smart Meters Danger, Wifi, EMF
Protection
https://www.youtube.com/playlist?list=PL9-HzPUvd0lSe5jXfsof1wQQFoUcYvJC3
PHENOMENA
OF FREQUENCY
https://www.youtube.com/playlist?list=PL9-HzPUvd0lQHitDEVl0yVv_x6KoheBtv
Business
Forecast for
Evan Schilpp
September 2,
1988
6:42 AM
Scranton,
Pennsylvania
August 29,
2019 - August 29, 2020
SOUND OF STARS
http://www.soundofstars.org
Contact :
Donald Adams
780-217-6841
Your Business Forecast begins on the following page. If the time period for an
interpretation is, for example, given as "Apr 1, 1997 (Feb 15, 1997 to May
15, 1997)", then it starts in mid-February, reaches greatest intensity
around April 1, and ends in mid-May. The first date listed is the time when the
influence has reached maximum strength; we can call this date the "peak
date". The influence starts on the beginning date, gradually increases in
strength until the peak date is reached, and then it gradually fades out until
the ending date is reached.
You may also notice that the same interpretation shows up periodically during
the year; this is not unusual. To eliminate redundant interpretations, you may
be informed that the astrological influence also occurred earlier and that you
should refer back to the previous occurrence of this interpretation.
At the top right margin after the dates, the abbreviated names of the aspects
and the two factors involved are given. For example, "Jup Sqr MC"
means that during the given dates "transiting Jupiter" is squaring
your "natal Midheaven". That is to say, the first factor that appears
is always the transiting planet (present position of the planet in the zodiac),
while the second component of the pair is "natal", or the position it
was in the zodiac at your birth. Also, the Midheaven (MC) is the apex or
beginning of the 10th house.
At the beginning of each interpretation the complete name of the aspect and the
two factors involved are given in capitalized letters. As before, the first
planet is in "transit" while the Midheaven is "natal".
Below it, the INTENSITY of the aspect is indicated in a scale from 1 to 10.
That is to say, an aspect with an influence of 1 is very weak and may not even
be noticed. On the other hand, an influence of 10 is very powerful. We can
consider aspects with an intensity of 8, 9 or 10 VERY STRONG, 6 or 7 STRONG, 4
or 5 AVERAGE, DECREASING at 2 or 3 and VERY WEAK at 0 or 1.
This report outlines the aspects between the transiting planets on one hand,
and the apex or beginning of the 10th house in the natal chart on the other.
Traditionally, besides the ten astrological planets (Sun, Moon, Mercury, Venus,
Mars, Jupiter, Saturn, Uranus, Neptune and Pluto), two points in the chart are
considered very important. The first is the Ascendant or beginning of the 1st
house, related to the personality and appearance of the individual. The second
is the Midheaven or apex of the 10th house, connected with the materialization
of goals and initiatives, as well as professional success and social
recognition. The Midheaven represents the aims or goals and the desire for
concrete action. Therefore, the astrological aspects that affect the Midheaven
are important in choosing the right time to start a business, commercial or
professional initiative.
First, this report is based on the birth date of the owner, founder, or major
associate of the business in question. In case there is more than one relevant
associate, it is advisable to consult the Business Forecast for the second
associate as well.
Second, to obtain this report, the party should provide an approximate time for
the business to be opened. The report then will give relevant dates for the
most advantageous and least desirable time to proceed with it. In case there is
more than one owner, it would be ideal to locate a date in both forecasts that
may have positive aspects or, at least, that neither have disharmonious
aspects.
But one might question the date one must consider. Does it constitute the date
the corporation was formed, the day on which the license was obtained, the day
the premises were rented, or the moment in which the toast was made? The answer
is very simple. The date of astrological validity is the one on which the
business started to serve the public. This is the real "birth" of the
business, while everything else constitutes the period of "gestation"
of that enterprise.
As a rule, it can be said that the best time for opening a business, in order
of strongest to weakest influence, is the following (a higher intensity
indicates greater influence): Existence of a TRINE (strong harmonious aspect)
between a planet and the Midheaven; Existence of a CONJUNCTION (neutral aspect)
between a beneficial planet and the Midheaven (only Jupiter conjunct MC can be
considered here); Existence of a SEXTILE (mild harmonious aspect) between a
planet and the Midheaven; Existence of a CONJUNCTION (neutral aspect) between a
planet (except Jupiter) and the Midheaven.
On the other hand, the most problematic dates for founding a business, in order
of strongest to weakest influence, are the following: Existence of a SQUARE
(strong disharmonious aspect) between a planet and the Midheaven;
Existence of an OPPOSITION (mild disharmonious aspect) between a planet
and the Midheaven.
In any case, as this is not a report of determination but only orientation, the
explanations of the "squares" and "oppositions" give advice
and practical solutions for the businesses that may have started during some of
these dates. This is especially useful for those that already have opened their
business and read this report to find out what astrological aspects were in
effect at the time they started their business. In case of harmonious aspects
(trines and sextiles) suggestions are also given on how to obtain the maximum
benefits of that astrological influence.
Lastly, it can be said that the "peak dates" possess the purest
influence. It is recommended to make use of the harmonious peak dates, if
possible. Thus, the mixture of influences is avoided in case there is more than
one aspect during given days.
Tropical/Topocentric NATAL CHART
Calculated for time zone 5 hours
Natal positions:
Sun=10VI10 Moo= 1GE24 Mer=
3LI41 Ven=24CN45 Mar=11AR08
Jup= 5GE20 Sat=25SA56 Ura=27SA03
Nep= 7CP30 Plu=10SC18
Asc=11VI37 MC= 8GE23
PLANET-TO-PLANET SELECTIONS
Natal: Sun Moo Mer Ven Mar Jup Sat Ura Nep Plu Asc MC
Transiting: Sun Mer Ven Mar Jup Sat Ura Nep Plu
ASPECT ORB ASPECT ORB
Conj ( 0 deg 00 min) 1 deg 00 min
Oppos (180 deg 00 min) 1 deg 00 min
Sqr ( 90 deg 00 min) 1 deg 00 min
Trine (120 deg 00 min) 1 deg 00 min
Sxtil ( 60 deg 00 min) 1 deg 00 min
Aug 31, 2019 5 AM (Aug 31, 2019 to Sep 1, 2019)
Mar Sqr MC
MARS SQUARE MC
INTENSITY: 3
A business started during these dates is characterized above all by impulse,
initiative and excessive risk. There is a notable capacity for obstacle
careers, that is to say, to confront problems and difficulties immediately,
without ever doubting your own ability. You have confidence in the
possibilities of your business and, generally, never become discouraged or
inhibited. Your goals or objectives are very clear and, although some blunders
or mistakes are made, your effort and inner energy causes you to continue in
spite of certain stumbling blocks.
This business needs to learn to keep its risks in check, because if it relies
too much on the ability to make spontaneous decisions, it is quite possible
that an overburden or certain tension is produced in the dynamics of the
business, as well as the persons that are part of it: owners, executives and
underlings. It is necessary to avoid this, to stay within your limits or in a
delicate balance. It would be advisable to reflect on your decisions so that
the successive transactions are not done blindly. When a specific plan is
itemized and calculated beforehand, the opportunities for success increase, not
only concerning better results, but also with respect to squandering less
energy.
If you don't follow this advice continuously, it is quite probable that in time
certain difficulties are prolonged or enlarged. Because of this, you must
always keep your cool and above all practice common sense. Even if at given
times your activities will be frantic, it is essential to appraise the
performance of your establishment so that carrying out your business can be
moderated, balanced and firm. To the contrary, if you act too cloddish and
foolish, it is very possible that your plans will not go as you thought. For
example, the competition could be greater than you had anticipated, or the
market toward which you wanted to direct your business will be much more
difficult to penetrate than you had expected, or the time it took to obtain
your objectives previously will be more delayed than you had anticipated. If
you always go to the limit and some unforeseen element emerges that delays
things, then the business can really turn bad, since in your performance plan
you had not taken into account the factors called imponderable.
This business has the great advantage of having assurance and confidence in its
possibilities, as well as the motivation and enthusiasm that exists in the
original idea on the part of the owners and managers. The motivation and
self-confidence must be shared. It is very important that a good labor rapport
exists and everyone is allowed to participate in the decisions, since that is
the only way that everyone understands their duty perfectly. Because of this,
it is crucial that the owners or directors keep a cool head, because if you
begin to lose your patience or act tense or sharply, it could cause resentment
throughout your business. That is to say, those disharmonious energies will
also affect your personnel. If one must face a difficult situation or if one
must achieve an added effort, it is developing respect in an environment,
including companionship. In that way, the people it has bearing on will be
integrated parts of the whole, will feel important and notice that their
efforts are being sufficiently valued. In this respect it is very important
that the owners or the persons making decisions, at times of certain urgency or
difficulty, outline things very well before submitting them to subordinates. It
is necessary to be realistic about things and, logically, to offer a motivation
in the form of incentives, especially in case an extra effort has to be made.
For the business to be successful it is important to achieve and maintain
prestige based on giving practical solutions, and rapid and efficient attention
to the problems and needs of the clients. This requires a direct and
exonerating relationship between the sales person and client. Furthermore, the
training of all staff of the business should be up-to-date, having the latest
information and being able to answer any question. The key is competitiveness.
Although the company may not be the absolute leader in its region, it clearly
needs to underline one, two or three concrete aspects that will serve as a
frame of reference for the clientele. Thus, for example, you could project the
rapid completion of the work, fast delivery of the product, efficiency in
maintenance or technical service, or a good previous study about the needs of
the clients, for then you are able to satisfy them completely. On the other
hand, an exemplary relationship between sales person and client implies that
the expectations of the buyer will be realistic and at no time exaggerated. It
is necessary to provide sufficient information to the client beforehand, so
that he knows as much as possible at the decision of purchase.
Finally, it is necessary to promote good relationships, companionship and
respect in the relationships, not only between the sales person and the client,
but also among everyone that works in the company. Because of this, it is
recommended that social or cultural events are organized, or seminars,
including leisure activities. In that way friendship, confidence and
companionship is promoted and possible tense situations in work relationships
are softened. Furthermore, these can be releases for them in the daily
activities of the company.
Aug 31, 2019 9 PM (Aug 31, 2019 to Sep 1, 2019)
Sun Sqr MC
SUN SQUARE MC
INTENSITY: 2
A business or investment started during these dates has certain elements
against it that have to be considered and analyzed. This does not mean that it
will be impossible to surpass these difficulties, since we are speaking of an
"intensity" of force that is not excessively detrimental.
To begin with, one must understand that the biggest flaw in the approach to the
business is a superiority complex. Because of the high expectations of the
owners or founders, the professional or commercial activity probably is born
with some pretensions and great exaggeration. However, its position in society
will be weak and this will cost this establishment or professional activity its
renown, prestige or consideration with the public. As the saying goes:
"all that glitters is not gold". This means that the business in
question can have too great of a facade and appearance, but for the most part,
mistakes are made.
The first mistake can be over confidence. In other words, those responsible for
the business have based their plan of operation and investments on goals that
are too optimistic. Since insufficient provisions were made and too many things
were assumed, problems will start to develop later.
Second, in dealing with clients, you may be too arrogant and inconsiderate of
them. This will cause them to shy away at the time of making a decision to
purchase. The same applies when your company fails to explain possible errors
or to recognize the rights of the customer, even when it is the mistake of a
company you deal with.
The third area of conflict is over selling, telling your present or potential
clients they are getting more than they are really getting. There is a tendency
to exaggerate the advantages and at the same time minimize possible or
potential disadvantages of things being sold, which hurts the selling
relationship and the client may not be completely satisfied. As a result, some
clients buy once, but will not feel like returning. That is to say, the client
will be an unsatisfied buyer that will have a negative perception of the
company. This will cause prejudice in the loyalty of the clientele toward the
business and toward the products, services or brands that it promotes.
The fourth possible mistake, one that can become vital, is what could be called
a miscalculation of the "social factor". That is to say, it could
occur that your trade or professional enterprise is not in tune with your
location or the fad of the moment. It could turn out to be a business of
egocentric character; that is to say, the activity has been designed, an
investment plan has been achieved, and things have been made to function for
the pleasure and personal satisfaction of the owners. There may be a
misconception that what you like, others will like. However, this is not so and
shows a real lack of research in the preferences of the potential or current
market toward which you want to direct your business. Or you may want to
encompass the whole market, that is to say, serve different types of people or
classes of clients, which certainly is difficult. To secure the quality and
appearance you seek, it would be preferable to establish a marketing approach
where the policy of the business is directed to a specific sector of the
population. But if you plan on covering all of the market, the personality or
definition of your business probably will be so ambiguous, mixed or undefined
with the marketing of your product or service that few persons will identify
with it.
The perfect solution to this situation can be described with one word:
creativity. Creativity can cause a business that did not bear the fruits
expected to surpass the difficulties through new ideas, contributions and
appropriate rectifications. Creativity, enthusiasm and originality of the
proprietors or owners of the business can turn the situation from gray to more
luminous. However, these decisions or rectifications should not be made too
quickly, since the typical mistake of some businesses is trying one approach
after another before realizing that the previous one has not worked out. This,
as seen by the public, supposes an image of insecurity and of the fact that the
company or its owners do not know what they want. Because of this, the
decisions of change should be made very deliberate and with an adequate
developing process. That is to say, seeing all the particulars of the case,
submitting the ideas or the plans to test before executing them, and not to
fall into new egocentric attitudes. To surpass the last mentioned, it is
necessary to listen to the clients and to observe their comments as valuable
and interesting keys, and to improve the perspective or the approach of the
business accordingly. To know how to listen can be an essential key to
rectifying and improving the situation.
Oct 1, 2019 4 PM (Sep 30, 2019 to Oct 2, 2019)
Sun Trine MC
SUN TRINE MC
INTENSITY: 2
The Sun is the symbol of the day and of light, and a business or commercial
activity started on this day is especially able to be developed in relation to
the public. That is to say, a business born during these days will have a
special magnetism for people who observe it from its beginning, since they will
detect the clarity and luminosity of the establishment, where everything is put
up front. One of the strong points of this business is going to be maintaining
its prices, always being direct and honest, and dealing with very exclusive
clients. Clients will appreciate this sincerity and, because of this, will be
especially faithful. If you continue this golden rule and at all cost avoid
dishonesty, unclear points, deceptive sales, or concealing certain defects of
the product from the clients, then you will obtain maximal results.
One also must take into account that the Sun represents the creation, the
creativity, the sublimation of energies and to a certain degree art, which
makes this a very auspicious time to begin an activity or investment in one
where aesthetics, force, energy and vitality of the idea will be central
elements.
If you think of opening a business during these dates, above all there will be
personal assurance that your products truly are the best, that they are leaders
in the market and present a higher quality than average. Therefore, besides the
first characteristic - sincerity of sales - we come to the second
essential key of this business: the quality and nobility of the environment. It
is not necessary to adorn your business with overly expensive decorations. Take
under consideration that for the client the environment of the local or the
decorative elements are not as important as the quality of the purchase. To be
successful with your business it is essential to be able "to support"
those characteristics that the Sun in harmonious position represents. For
example, choose those things that offer a greater guarantee and procure to
market products of quality and recognized prestige. This is not so much a large
business or one in which basically inexpensive things are prevailing. On the
contrary, the most advantageous and right approach for an establishment opened
during this time is to encourage distinction, confidence in the product and the
best of the materials that are used.
As third fundamental element could be mentioned the dynamic force that is going
to be in the life of your business. It consists of extroversion, sociableness
and an impeccable image. You as well as your personnel should emphasize the
need to encourage the prestige of the business. To attain this, the dealings
with clients have to be confident, noble, respectful and at the same time warm.
In other words, the image, presence and dignity in dealing with the clients
will be fundamental, since only this will be able to generate a competent
environment and selling relationship. It will be conscientious and makes your
personnel aware of the importance that involves the act of purchasing or
selling, which product or service it will be, or the idea that is tried. See it
as an energy exchange, as a subtle commitment to the person with whom you
exchange your forces and to a certain degree your will. Always let the clients
be fully aware of their decision and help in a professional way to establish
the right approach, application and use of their purchases. An erudite manner,
expansive, well informed and optimistic in dealing with people is what allows
you to reach that so essential factor called reputation. Furthermore, never
hire personnel that, by apparently being less expensive, in reality may not
have a real vocation or individual sense of the work they do. If they transmit
discouragement, lack of conviction, insecurity and apathy, it could certainly
diminish the halo of self-confidence that was considered as fundamental.
Briefly, this is a good time to begin any commercial activity where the
possibility of becoming a leader exists. Not necessarily a leader in sales, but
in quality, service, personal dealings and giving attention to the clientele.
For example, it is a time suited to open a business that has contact with the
public, such as the government, the town hall or the like. Also, the premises
have to be as visible as they can be, and if this is not possible, social
contacts will be very important, since they will open doors to the business.
Oct 16, 2019 11 PM (Oct 15, 2019 to Oct 18, 2019)
Mar Trine MC
MARS TRINE MC
INTENSITY: 3
A business opened during these dates is labeled with great dynamism and
capacity to struggle. Neither the owners, nor the agents, or the personnel are
intimidated by unfavorable circumstances. Because of the existing assertiveness
and ability to respond, difficulties are surpassed quickly and generally lead
to success. These spontaneous decisions have nothing to do with lack of
discipline or doing things haphazardly. To the contrary, this business is
characterized by following a very clear and defined path with very specific
objectives outlined beforehand. There is the ability to make decisions on the
spur of the moment, but without losing sight of the reference or goal that is
very clear in the forefront.
It is well known that competition is tough and that the price is dictated by
the demand of the public or society. To penetrate the complex interest, trends
and preferences of the public, it is essential to develop a personal stamp and
a very defined line in the industrial or commercial activities or services that
are being offered. This is called efficiency, going directly to the point, or
simply giving practical solutions to the problems and needs of the clients. A
business opened or started during these dates is going to have all of these
qualities. Passiveness or a tendency to conform will never exist, and
indecision has no meaning in this business.
The force of this business lies in its capacity to struggle, which never should
be understood as aggressiveness, but more as competitiveness. Wanting to be a
leader by your own merits and standing out from others is no sin. To the
contrary, the one who takes the initiative is the one who gains. In that way
the clients observe that the personnel and managers of the business are trying
their best to satisfy their needs, always procuring that it will be in the most
rapid and direct way possible. Many clients probably patronize this
establishment because at others they find too many arrears, certain
incompetence or lack of definition. On the other hand, in your company they find
quick solutions and immediate service. Everyone gains when the relationship
with clients is direct, exonerating, energetic, professional and very clear
with respect to commitments. In this connection, it is very important that the
client always understands the terms of the negotiation, that is to say, what to
expect of the product or service as well as the company, including the quality,
price, guarantee on parts or maintenance requirements, etc. If from the
beginning the seller clearly outlines the characteristics, conditions,
advantages and disadvantages of the product to the clients, mutual confidence
is earned.
Simultaneously, the client always appreciates knowing that the person who is
going to provide a product or service is honest, trustworthy and enthusiastic
about the excellence and quality of things he/she is trying to market.
Obviously, if the client observes a degree of insecurity in the seller, it is
very probable that he will turn around and is gone. However, if the seller of
the product in question is transmitting confidence, security and enthusiasm,
there is a much better chance that a spark will emerge that will motivate the
buyer to decide on the acquisition of the goods or service. The clients also
appreciate fast service on items requested that are momentarily out of stock.
Though it may seem strange, many times the seller may unconsciously generate
problems or obstacles for himself or his client. This, however, will absolutely
not occur in this business, since the owners as well as managers and the
personnel have a very clear idea of what they want and how to communicate,
therefore there is no dubiousness or greater complications. Your philosophy is
to make everything easy so that the buyer can easily make up his mind.
Finally, one must mention as key factor of this business its ease at the time
of assuming risks. That is to say, the mechanism of the entire business as
formed by the owners, managers and personnel will not resent it when it becomes
necessary to accelerate the pace of activity, even when attempting to initiate
an expansion that involves a certain risk. To the contrary, the new goals, and
putting them ahead of other objectives, turn out to be a stimulus for the group
of people that participate in the project. Therefore, motivation is fundamental
here. In other words, everyone on the payroll should be advanced in direct
relationship to their contributions, for their effort in favor of the business
and their ability to resolve the daily problems.
Nov 30, 2019 5 PM (Nov 29, 2019 to Dec 1, 2019)
Sun Oppos MC
SUN OPPOSITION MC
INTENSITY: 1
A business or investment started during these dates has certain elements
against it that have to be considered and analyzed. This does not mean that it
will be impossible to surpass these difficulties, since we are speaking of an
"intensity" of force that is not excessively detrimental.
To begin with, one must understand that the biggest flaw in the approach to the
business is a superiority complex. Because of the high expectations of the
owners or founders, the professional or commercial activity probably is born
with some pretensions and great exaggeration. However, its position in society
will be weak and this will cost this establishment or professional activity its
renown, prestige or consideration with the public. As the saying goes:
"all that glitters is not gold". This means that the business in
question can have too great of a facade and appearance, but for the most part,
mistakes are made.
The first mistake can be over confidence. In other words, those responsible for
the business have based their plan of operation and investments on goals that
are too optimistic. Since insufficient provisions were made and too many things
were assumed, problems will start to develop later.
Second, in dealing with clients, you may be too arrogant and inconsiderate of
them. This will cause them to shy away at the time of making a decision to
purchase. The same applies when your company fails to explain possible errors
or to recognize the rights of the customer, even when it is the mistake of a
company you deal with.
The third area of conflict is over selling, telling your present or potential
clients they are getting more than they are really getting. There is a tendency
to exaggerate the advantages and at the same time minimize possible or
potential disadvantages of things being sold, which hurts the selling
relationship and the client may not be completely satisfied. As a result, some
clients buy once, but will not feel like returning. That is to say, the client
will be an unsatisfied buyer that will have a negative perception of the
company. This will cause prejudice in the loyalty of the clientele toward the
business and toward the products, services or brands that it promotes.
The fourth possible mistake, one that can become vital, is what could be called
a miscalculation of the "social factor". That is to say, it could
occur that your trade or professional enterprise is not in tune with your
location or the fad of the moment. It could turn out to be a business of
egocentric character; that is to say, the activity has been designed, an
investment plan has been achieved, and things have been made to function for
the pleasure and personal satisfaction of the owners. There may be a misconception
that what you like, others will like. However, this is not so and shows a real
lack of research in the preferences of the potential or current market toward
which you want to direct your business. Or you may want to encompass the whole
market, that is to say, serve different types of people or classes of clients,
which certainly is difficult. To secure the quality and appearance you seek, it
would be preferable to establish a marketing approach where the policy of the
business is directed to a specific sector of the population. But if you plan on
covering all of the market, the personality or definition of your business
probably will be so ambiguous, mixed or undefined with the marketing of your
product or service that few persons will identify with it.
The perfect solution to this situation can be described with one word:
creativity. Creativity can cause a business that did not bear the fruits
expected to surpass the difficulties through new ideas, contributions and
appropriate rectifications. Creativity, enthusiasm and originality of the
proprietors or owners of the business can turn the situation from gray to more
luminous. However, these decisions or rectifications should not be made too
quickly, since the typical mistake of some businesses is trying one approach
after another before realizing that the previous one has not worked out. This,
as seen by the public, supposes an image of insecurity and of the fact that the
company or its owners do not know what they want. Because of this, the decisions
of change should be made very deliberate and with an adequate developing
process. That is to say, seeing all the particulars of the case, submitting the
ideas or the plans to test before executing them, and not to fall into new
egocentric attitudes. To surpass the last mentioned, it is necessary to listen
to the clients and to observe their comments as valuable and interesting keys,
and to improve the perspective or the approach of the business accordingly. To
know how to listen can be an essential key to rectifying and improving the
situation.
Jan 15, 2020 2 PM (Jan 14, 2020 to Jan 17, 2020)
Mar Oppos MC
MARS OPPOSITION MC
INTENSITY: 2
A business started during these dates is characterized above all by impulse,
initiative and excessive risk. There is a notable capacity for obstacle
careers, that is to say, to confront problems and difficulties immediately,
without ever doubting your own ability. You have confidence in the
possibilities of your business and, generally, never become discouraged or
inhibited. Your goals or objectives are very clear and, although some blunders
or mistakes are made, your effort and inner energy causes you to continue in
spite of certain stumbling blocks.
This business needs to learn to keep its risks in check, because if it relies
too much on the ability to make spontaneous decisions, it is quite possible
that an overburden or certain tension is produced in the dynamics of the
business, as well as the persons that are part of it: owners, executives and
underlings. It is necessary to avoid this, to stay within your limits or in a
delicate balance. It would be advisable to reflect on your decisions so that
the successive transactions are not done blindly. When a specific plan is
itemized and calculated beforehand, the opportunities for success increase, not
only concerning better results, but also with respect to squandering less
energy.
If you don't follow this advice continuously, it is quite probable that in time
certain difficulties are prolonged or enlarged. Because of this, you must
always keep your cool and above all practice common sense. Even if at given
times your activities will be frantic, it is essential to appraise the
performance of your establishment so that carrying out your business can be
moderated, balanced and firm. To the contrary, if you act too cloddish and
foolish, it is very possible that your plans will not go as you thought. For
example, the competition could be greater than you had anticipated, or the
market toward which you wanted to direct your business will be much more
difficult to penetrate than you had expected, or the time it took to obtain
your objectives previously will be more delayed than you had anticipated. If
you always go to the limit and some unforeseen element emerges that delays
things, then the business can really turn bad, since in your performance plan
you had not taken into account the factors called imponderable.
This business has the great advantage of having assurance and confidence in its
possibilities, as well as the motivation and enthusiasm that exists in the
original idea on the part of the owners and managers. The motivation and
self-confidence must be shared. It is very important that a good labor rapport
exists and everyone is allowed to participate in the decisions, since that is
the only way that everyone understands their duty perfectly. Because of this,
it is crucial that the owners or directors keep a cool head, because if you
begin to lose your patience or act tense or sharply, it could cause resentment
throughout your business. That is to say, those disharmonious energies will
also affect your personnel. If one must face a difficult situation or if one
must achieve an added effort, it is developing respect in an environment,
including companionship. In that way, the people it has bearing on will be
integrated parts of the whole, will feel important and notice that their
efforts are being sufficiently valued. In this respect it is very important
that the owners or the persons making decisions, at times of certain urgency or
difficulty, outline things very well before submitting them to subordinates. It
is necessary to be realistic about things and, logically, to offer a motivation
in the form of incentives, especially in case an extra effort has to be made.
For the business to be successful it is important to achieve and maintain
prestige based on giving practical solutions, and rapid and efficient attention
to the problems and needs of the clients. This requires a direct and
exonerating relationship between the sales person and client. Furthermore, the
training of all staff of the business should be up-to-date, having the latest
information and being able to answer any question. The key is competitiveness.
Although the company may not be the absolute leader in its region, it clearly
needs to underline one, two or three concrete aspects that will serve as a
frame of reference for the clientele. Thus, for example, you could project the
rapid completion of the work, fast delivery of the product, efficiency in
maintenance or technical service, or a good previous study about the needs of
the clients, for then you are able to satisfy them completely. On the other
hand, an exemplary relationship between sales person and client implies that
the expectations of the buyer will be realistic and at no time exaggerated. It
is necessary to provide sufficient information to the client beforehand, so
that he knows as much as possible at the decision of purchase.
Finally, it is necessary to promote good relationships, companionship and
respect in the relationships, not only between the sales person and the client,
but also among everyone that works in the company. Because of this, it is
recommended that social or cultural events are organized, or seminars, including
leisure activities. In that way friendship, confidence and companionship is
promoted and possible tense situations in work relationships are softened.
Furthermore, these can be releases for them in the daily activities of the
company.
Jan 28, 2020 4 PM (Jan 28, 2020 to Jan 29, 2020)
Sun Trine MC
This astrological influence (Sun Trine MC) also occurred on Oct 1, 2019 (peak
date). Please refer to this date.
Feb 27, 2020 8 AM (Feb 27, 2020 to Feb 28, 2020)
Sun Sqr MC
This astrological influence (Sun Sqr MC) also occurred on Aug 31, 2019 (peak
date). Please refer to this date.
Mar 28, 2020 10 AM (Mar 28, 2020 to Mar 29, 2020)
Sun Sxtil MC
SUN SEXTILE MC
INTENSITY: 1
The Sun is the symbol of the day and of light, and a business or commercial
activity started on this day is especially able to be developed in relation to
the public. That is to say, a business born during these days will have a
special magnetism for people who observe it from its beginning, since they will
detect the clarity and luminosity of the establishment, where everything is put
up front. One of the strong points of this business is going to be maintaining
its prices, always being direct and honest, and dealing with very exclusive
clients. Clients will appreciate this sincerity and, because of this, will be
especially faithful. If you continue this golden rule and at all cost avoid
dishonesty, unclear points, deceptive sales, or concealing certain defects of
the product from the clients, then you will obtain maximal results.
One also must take into account that the Sun represents the creation, the
creativity, the sublimation of energies and to a certain degree art, which
makes this a very auspicious time to begin an activity or investment in one
where aesthetics, force, energy and vitality of the idea will be central
elements.
If you think of opening a business during these dates, above all there will be
personal assurance that your products truly are the best, that they are leaders
in the market and present a higher quality than average. Therefore, besides the
first characteristic - sincerity of sales - we come to the second
essential key of this business: the quality and nobility of the environment. It
is not necessary to adorn your business with overly expensive decorations. Take
under consideration that for the client the environment of the local or the
decorative elements are not as important as the quality of the purchase. To be
successful with your business it is essential to be able "to support"
those characteristics that the Sun in harmonious position represents. For
example, choose those things that offer a greater guarantee and procure to
market products of quality and recognized prestige. This is not so much a large
business or one in which basically inexpensive things are prevailing. On the
contrary, the most advantageous and right approach for an establishment opened
during this time is to encourage distinction, confidence in the product and the
best of the materials that are used.
As third fundamental element could be mentioned the dynamic force that is going
to be in the life of your business. It consists of extroversion, sociableness
and an impeccable image. You as well as your personnel should emphasize the
need to encourage the prestige of the business. To attain this, the dealings
with clients have to be confident, noble, respectful and at the same time warm.
In other words, the image, presence and dignity in dealing with the clients
will be fundamental, since only this will be able to generate a competent
environment and selling relationship. It will be conscientious and makes your
personnel aware of the importance that involves the act of purchasing or
selling, which product or service it will be, or the idea that is tried. See it
as an energy exchange, as a subtle commitment to the person with whom you
exchange your forces and to a certain degree your will. Always let the clients
be fully aware of their decision and help in a professional way to establish
the right approach, application and use of their purchases. An erudite manner,
expansive, well informed and optimistic in dealing with people is what allows
you to reach that so essential factor called reputation. Furthermore, never
hire personnel that, by apparently being less expensive, in reality may not
have a real vocation or individual sense of the work they do. If they transmit
discouragement, lack of conviction, insecurity and apathy, it could certainly
diminish the halo of self-confidence that was considered as fundamental.
Briefly, this is a good time to begin any commercial activity where the
possibility of becoming a leader exists. Not necessarily a leader in sales, but
in quality, service, personal dealings and giving attention to the clientele.
For example, it is a time suited to open a business that has contact with the
public, such as the government, the town hall or the like. Also, the premises
have to be as visible as they can be, and if this is not possible, social
contacts will be very important, since they will open doors to the business.
Apr 11, 2020 4 PM (Apr 10, 2020 to Apr 13, 2020)
Mar Trine MC
This astrological influence (Mar Trine MC) also occurred on Oct 16, 2019 (peak
date). Please refer to this date.
May 25, 2020 8 AM (May 25, 2020 to May 26, 2020)
Mar Sqr MC
This astrological influence (Mar Sqr MC) also occurred on Aug 31, 2019 (peak
date). Please refer to this date.
May 29, 2020 2 AM (May 29, 2020 to May 30, 2020)
Sun Conj MC
SUN CONJUNCT MC
INTENSITY: 2
The Sun is the center of the solar system and its radiation expands toward the
rest of the planets, bringing other planetary aspects into focus. It could be
said that business may not be for everyone. If the owners of a business have
sufficient skillfulness and know how to use opportunities, it is quite probable
that the activity generates results. In other words, it is very possible that
your commercial or professional activity may bring other subsequent
initiatives, something descending from your current business. This solar
radiation is fundamentally creative. The vitality and force of your
professional activity will depend mostly on the genuine contribution on the
part of the leaders of your business. That is to say, you can't allow yourself
to fall into routine, because this certainly would be a symptom of decline of
the activity. It shows lack of conviction on the part of the owners as well as
the personnel, instead of transmitting assurance and self-confidence, and not
only a competitive spirit, but also continuous search for better quality in the
line of your business, since this is not a large business, neither of things
nor inexpensive services that you take little pains with. It is meant to reach
excellence in dealing with your clients, the quality of the materials, products
or services that are lent; and, as a rule, a wide sense of your vocation, that
is to say, to do things because you like to do them, because you are convinced
and not because of obligation or routine.
If you follow along those lines, public recognition certainly will follow; that
is what results in reputation and prestige of the business. To achieve it, a
dose of sincerity is necessary, sincerity among the associates, sincerity among
personnel and sincerity with your own reality that surrounds you. Certainly, a
business opened during these dates will have the virtue of seeing the face of
reality, which will bring advantages to draw things to the maximum, since you
will not ever be evading any difficulties. On the contrary, any experience that
in principle could be considered as negative, such as a decrease in sales, will
be immediately analyzed and experimented with and noted that something is not
done correctly. Thus, an attitude of defeat will never exist.
Individual energy indeed motivates this business, where enthusiasm, conviction
and the spirit of enterprise of your supervision and personnel will be
essential keys for the achievement of success. If the activity of this business
is taken with a spirit of sportsmanship in the widest sense of the word, then
important qualities like the will, effort, humility and competitiveness will
come to the surface.
Thanks to the activity of this business very good social relationships will
emerge that can increase your perspectives and become a key to open doors that
you would not be able to glimpse until later. For example, the contact with
important persons, a conversation with persons who are very creative and
provide valuable advice; the appearance of contracts, sales or relationships to
people in government or the town hall, as well as progressively building a
loyal and select clientele. This doesn't mean to have an exclusive client
circle, but to offer something that is good in order to attract what is good,
and to refrain from fraud and trickery.
Respect is another element for the right operation of your business. In fact it
will be one of the fundamental characteristics of it: mutual respect among the
personnel, with the client, in directing or managing your staff. Dignity,
exoneration and openness promotes high human relationships and causes the
public to focus especially on your business, and the clients will be motivated
to be loyal to you. The clientele will know that in your company they will find
serious, professional and warm dealings, and at the same time some impartial
and objective advice with the knowledge that everything agreed upon will be
fulfilled. In other words, the fundamental golden rule is going to be that
"your word is as good as your signature".
In sales, one of the greater resistances on the part of the consumer at the
time of buying is distrust, and one of the greater factors that causes the
client to break with your establishment is the feeling of being defrauded. To
obtain a subtle balance, sincerity and formality is necessary; clearly
explaining the advantages and disadvantages of each one of the products and
services that are offered. Neither is it good to excessively increase the
expectations of the client, nor to give a sense of inadequacy or lack of
conviction about the qualities of the product other than what you want to sell.
An open and realistic position protects you from possible claims or complaints
from your clients.
If you are the owner or one of the owners of a business opened during these
dates, you don't have to be afraid of exercising your authority, but should
avoid a conceited attitude, being arrogant and bragging. Consider yourself
worthy, but not arrogant, sure of yourself, but not boasting, and have trust in
your circumstances, but don't be excessively pretentious in your position. If
you become aware of your abilities as manager or director, you will see that
the creativity and energy existing in your business will be remunerated. See
the commercial activity, enterprise or business as an energy exchange with the
environment and also as an excellent opportunity to perfect itself, to express
your creative abilities, and to develop aspects of your personality that up
until now were in the state of potential. With this philosophy you will observe
that the control, success and expansion of a business are bound to the right
and conscious managing of your own energies. In other words, a balanced
position results in balance, polite authority obtains maximum results, and
plans in accordance with reality generate successful and auspicious
circumstances. Express the best of yourself and you will prove that life at no
time is going to fail you. In other words, any creative and industrious energy
will always bring the same in return.
Jul 12, 2020 6 AM (Jul 10, 2020 to Jul 14, 2020)
Mar Sxtil MC
MARS SEXTILE MC
INTENSITY: 2
A business opened during these dates is labeled with great dynamism and
capacity to struggle. Neither the owners, nor the agents, or the personnel are
intimidated by unfavorable circumstances. Because of the existing assertiveness
and ability to respond, difficulties are surpassed quickly and generally lead
to success. These spontaneous decisions have nothing to do with lack of discipline
or doing things haphazardly. To the contrary, this business is characterized by
following a very clear and defined path with very specific objectives outlined
beforehand. There is the ability to make decisions on the spur of the moment,
but without losing sight of the reference or goal that is very clear in the
forefront.
It is well known that competition is tough and that the price is dictated by
the demand of the public or society. To penetrate the complex interest, trends
and preferences of the public, it is essential to develop a personal stamp and
a very defined line in the industrial or commercial activities or services that
are being offered. This is called efficiency, going directly to the point, or
simply giving practical solutions to the problems and needs of the clients. A
business opened or started during these dates is going to have all of these
qualities. Passiveness or a tendency to conform will never exist, and
indecision has no meaning in this business.
The force of this business lies in its capacity to struggle, which never should
be understood as aggressiveness, but more as competitiveness. Wanting to be a
leader by your own merits and standing out from others is no sin. To the
contrary, the one who takes the initiative is the one who gains. In that way
the clients observe that the personnel and managers of the business are trying
their best to satisfy their needs, always procuring that it will be in the most
rapid and direct way possible. Many clients probably patronize this establishment
because at others they find too many arrears, certain incompetence or lack of
definition. On the other hand, in your company they find quick solutions and
immediate service. Everyone gains when the relationship with clients is direct,
exonerating, energetic, professional and very clear with respect to
commitments. In this connection, it is very important that the client always
understands the terms of the negotiation, that is to say, what to expect of the
product or service as well as the company, including the quality, price,
guarantee on parts or maintenance requirements, etc. If from the beginning the
seller clearly outlines the characteristics, conditions, advantages and
disadvantages of the product to the clients, mutual confidence is earned.
Simultaneously, the client always appreciates knowing that the person who is
going to provide a product or service is honest, trustworthy and enthusiastic
about the excellence and quality of things he/she is trying to market.
Obviously, if the client observes a degree of insecurity in the seller, it is
very probable that he will turn around and is gone. However, if the seller of
the product in question is transmitting confidence, security and enthusiasm,
there is a much better chance that a spark will emerge that will motivate the
buyer to decide on the acquisition of the goods or service. The clients also
appreciate fast service on items requested that are momentarily out of stock.
Though it may seem strange, many times the seller may unconsciously generate problems
or obstacles for himself or his client. This, however, will absolutely not
occur in this business, since the owners as well as managers and the personnel
have a very clear idea of what they want and how to communicate, therefore
there is no dubiousness or greater complications. Your philosophy is to make
everything easy so that the buyer can easily make up his mind.
Finally, one must mention as key factor of this business its ease at the time
of assuming risks. That is to say, the mechanism of the entire business as
formed by the owners, managers and personnel will not resent it when it becomes
necessary to accelerate the pace of activity, even when attempting to initiate
an expansion that involves a certain risk. To the contrary, the new goals, and
putting them ahead of other objectives, turn out to be a stimulus for the group
of people that participate in the project. Therefore, motivation is fundamental
here. In other words, everyone on the payroll should be advanced in direct
relationship to their contributions, for their effort in favor of the business
and their ability to resolve the daily problems.
Jul 30, 2020 10 PM (Jul 30, 2020 to Jul 31, 2020)
Sun Sxtil MC
This astrological influence (Sun Sxtil MC) also occurred on Mar 28, 2020 (peak
date). Please refer to this date.
Some reports come with full detailed
text cover the time period requested, day, week,
month year and or graphs. Graphs of specific influences can also be
ordered without text.
FIXED STARS – WHERE
ARE THE STARS IN YOUR CHART
GRAPHS PLOTTING TRENDS FOR PEAK (RISE) & CRISIS
(FALL) CAN BE CHARTED FOR
ANY TIME PERIOD FOR ANY OF THE FOLLOWING ;
QUALITY OF LIFE ZONES
- WHERE WILL YOU BEST THRIVE, IN ANY AREA OF YOUR LIFE
Comes with full detailed text descriptions and map
indicating zones.
·
THE RANKED PROFILE : WHAT ARE YOUR
STRENGTHS & CHALLENGES – your key and
most important KEY points ranked with a precise
numeric scoring system – highly accurate.
By developing and utilizing
your strengths in your career and the activities that make up the greater
part of your life, and
also by improving your weak points to a point of being reasonable and
functional,
you can improve your
chances of living a fulfilling, meaningful, and rewarding life.
·
NATAL – Chart with full text description
·
TRANSITS – Collection of specific
influences, event types, experiences for a time period ;
month, 3 months, one year.
·
COMPATIBILITY – Romance, Friend, Business Partner
·
BUSINESS FORECAST - Text Only
·
BUSINESS FORECAST – Text with Single Chart shows
trends for one year
·
FINANCE FORECAST – Graph Only shows trends for one
year
·
BUSINESS & FINANCE, PEAK
PERFORMANCE Metrics – Multiple text reports,
many subjects graphed
·
FORECAST FOR SINGLE QUESTION
(HORARY) – Personal
and or Romance related subjects,
gives detailed text descriptors of likely outcomes,
trends, situations.
·
ADVANCED FORECAST FOR SINGLE
QUESTION (HORARY) – Gives same as above but
includes graphs and additional details of people,
event types, environments, directions, qualities,
characteristics.
·
FIXED STARS REPORT
·
RELOCATIONAL CHART WITH REPORT - An
astrological analysis of what you are likely to
experience in the
cities and towns that you selected is given.
·
VEDIC NATAL CHART – Comes with text and chart
graphics
·
RECTIFICATION – If your birth time is unknown,
this service discovers and pinpoints the
correct time of birth
SEE ALSO ;
AND
PEAK OPPORTUNITY WINDOWS
THROUGH OUT THE YEAR (LEFT GRAPH) ARE
IDENTIFIED TO THE DAY
RANGE, THEN FOR CRITICAL DAYS, SPECIFIC TIME
WINDOWS FOR THESE DAYS
ARE DETERMINED (RIGHT GRAPH)
Astrological
forecasting involves a high level of risk and may not be suitable for all who
wish to
employ
its use. Any activities regardless of the level of risk are soley the
responsibility of the
individual
under taking such activities.
The
risk grows as planetary interplay is lower. Financial objectives, risk
appetite, and the
player's
level of experience must be carefully weighed before entering into any risk
activity.
There
is always a possibility of losing. In financial matters some or all of your
funds/deposit
could
be lost. Do not risk money which you cannot afford to lose. Consult an
appropriate
industry
advisor before entering into any risk activity.
Any
statements, comments, or other information provided by Donald Adams and or
Sound
of Stars on this or other sites that have received permission to republish the
content
originating
in magazines, YouTube, astrological forums, or other venues reflect the concept
that
astrology is for entertainment purposes only and does not necessarily represent
anything
other
than possible outcomes.
Omissions
and errors may occur. Any news, analysis, opinion, or any other information
contained
in reports or other media and permitted re-published content should be taken
as
general astrological commentary.
All
astrology products, services, and information provided are not to be construed
as
investment
advice or any other type of professional advice. Donald Adams and or
Sound
of Stars will not accept liability for any damage, loss, including without
limitation
to,
any profit loss, which may either arise directly or indirectly from use of such
information
contained
within this website or offered in its product or services.
INDEMNITY
You
agree to indemnify and hold Donald Adams and or Sound of Stars and any
affiliates,
agents,
employees, partners, and licensors harmless from any and all claims or demands,
including
reasonable court costs and attorneys' fees, made by any third party due to or
arising
out of the content submitted, posted, transmited, modified, or otherwise made
available
through Donald Adams and or Sound of Stars's website or any other venue,
your
use of Donald Adams and or Sound of Stars Services, your connection to
Donald
Adams and or Sound of Stars Services, your violation of the terms of service,
or
your violation of any rights of another.
By
accessing and using Donald Adams' and or Sound of Stars astrological products
and/or
services, you acknowledge that you have read and agree to the terms of
service
above. Your continued use of this site, or any products or services after
reading
the stipulations to these terms of service signifies that you have viewed and
accepted
these changes. If you do not agree to be bound by this agreement, do not
use
any of the products, services, or web site.
I Agree
===================================
DESCRIPTION OF RED PANEL TIMELINE ( SEE TEXT BELOW IMAGE
):
A Typical Consult Session with Doc Starz
http://www.youtube.com/edit?ns=1&video_id=tCAeCLJDQr4
In these cases the session is
performed online via Skype, audio-video
or over the phone. Time is billed either per minute or by the
hour.
Normally I would only travel for
group events or for small executive class sessions (round table style
normally).
In some case clients will travel to
come see me, but the skype session usually offers the best overall benefits.
If you are uncertain how and where
to begin in your first consultation I recommend a 'discovery' session first as
our intro session, where we spend our first hour deriving and formulating your
concerns and priorities. This often helps
clients in forging a framework and foundation, from which we can plan from and
build on. The rate for this is the
standard one.
After I receive your payment, I
will review time slots and determine the best energetic day for you. I will then send you a suggested 'best
day(s)' for our discussion and together we can work out the optimum schedule
for our discussions.
Following below are different
options you can choose from ;
You can book sessions in hour
blocks of 1 or 2 hours at different rates.
Note, consult sessions must be
prepaid and booked a minimum of five days in advance. Bookings are
non-refundable, but if needed time slots can be changed with 24 hour notice
given.
2 hour consult session @
standard Rate ;
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=4T7MWZPVSFP6N
1 hour consult session @
standard Rate ;
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=NLXLBDXXHX2BW
..............
Most clients who book private consult
sessions are executives and or professionals like these ;
http://www.soundofstars.org/comments.htm#pros
http://www.soundofstars.org/comments.htm#celebs
====================
